← Board

47 Robins Road Queenstown 9300

Queenstown Lakes · property 6712 · Lot 6 DP 7237 - 0.126400 Ha CT- OT376/141

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260661 Resource Construct 10 Residential Units With Attached Flats, Enable The Use Of The Units For Residential Visitor Accommodation And To Undertake A Subsequent Subdivision At 47 Robins Road, Queenstown Wolfbrook Residential Limited Waiting for Further Information
BC261098 Building Construction Of Multiunit Dwellings Over Block A And B. Units 25 Are Singleunit Townhouses. Unit 1 And Units 610 Are Dualkey Townhouses With Seperate Ground Floor Studio. Granted
BC060441 Building Construction Of Footbridge Over Horne Creek Lapsed 13 Jun 2006

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of RM260661 read 18 Nov 2026

Lodged by
Erin Stagg - Edgar Planning Ltd
erin@edgarplanning.co.nz
027 251 1921
Applicant
Wolfbrook Residential Limited
will@wolfbrook.co.nz
accounts@wolfbrook.co.nz
027 824 0711
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • cedar cladding, oil finished and vertical cedar scriber detail to
  • Cedar horizontal weatherboard Vertical timber scribers

375726-Updated Plans (PDF, 11.0MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC261098 read 18 Nov 2026

Value of work
$4.5m estimated on the application form, GST included
Designer
Criterion Group Ltd
james@criteiongroup.nz
027 399 0363
Engineer
Tetrad Ltd
alex@tetrad.co.nz
0274257708
Lodged by
Criterion Group Ltd (Agent)
james@criteriongroup.nz
consents@wolfbrook.co.nz
027 399 0363
Applicant
Owner
will@wolfbrook.co.nz
027 824 0711
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • ABODO VERTICAL CLADDING SYSTEM JAMES HARDIE AXON™ PANEL CLADDING
  • 4221AV ABODO VERTICAL CLADDING SYSTEM This section relates to the supply and installation of Abodo Vertical cladding.
  • Vertical weatherboards Fascia
  • Refer to 5124AL ABODO TIMBER LININGS for coordination with interior timber wall, soffit and ceiling finishes.
  • CodeMark CMNZ70046 ver2 - Abodo Weatherboard Cladding System 1.4 MANUFACTURER/SUPPLIER DOCUMENTS
  • Abodo Ltd documents relating to this part of the work: Abodo CodeMark Weatherboard Cladding Manual CWB-M-130925 April 2020
  • Company: Abodo Wood Limited Trading as: Abodo Wood
  • Web: www.abodo.co.nz Email: info@abodo.co.nz
  • 25 years (pro rata beyond 15 years): For weatherboards and accessories CRITERION GROUP Criterion Limited 47 Robins Road 357661
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 27 of 149 2 PRODUCTS
  • 40 years (pro rata beyond 15 years): For Vaaro® weatherboards and accessories Provide this warranty on the manufacturer/supplier standard form (if not available then use the
  • 1.10 EXTERNAL FIRE SPREAD - TIMBER CLADDING MATERIAL, CLASSIFICATION Abodo Vaaro® 18mm thick timber board both uncoated and with Abodo Protector WB Stain has
  • 2.2 VULCAN VERTICAL WEATHERBOARDS Thermally modified Radiata Pine vertical weatherboards in WB12 and WB18 tongue & groove
  • shiplap profiles, available in Architectural Series and Standard Series grades with Brushed and Bandsawn finishes. Supplied in 1.2m minimum lengths. Refer to SELECTIONS.
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 28 of 149 2.3 VAARO® VERTICAL WEATHERBOARDS
  • Thermally modified Radiata Pine vertical weatherboards in WB12 and WB18 profiles, available in Architectural Series grade with Brushed and Bandsawn finishes. Supplied in 1.2m minimum
  • 2.14 WEATHERBOARD FIXINGS - FACE FIXED NAILS Stainless steel or class 4 hot dipped galvanized annular grooved Pentagon and Rose Head nails,
  • 2.15 WEATHERBOARD FIXINGS - SECRET FIXED NAILS Stainless steel or class 4 hot dipped galvanized annular grooved Flat Head nails, 2.8mm and
  • 2.16 WEATHERBOARD FIXINGS - POWER DRIVEN SECRET FIXED NAILS Stainless steel or class 4 hot dipped galvanized Ring R-drive nails, 2.87mm and 3.06mm x length to
  • 2.17 WEATHERBOARD FIXINGS - SECRET FIXED SCREWS Stainless steel or class 4 hot dipped galvanized self-drilling countersunk screws, 6g and 8g x length
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 29 of 149 3 EXECUTION
  • Abodo Protector water based stain and Abodo Protector End Seal, available in a range of colours. Refer to SELECTIONS.
  • Iron Vitriol (Iron Sulphate) timber coating and Abodo Protector End Seal. Conditions
  • Weatherboard cladding moisture content: 16% maximum Installation - generally
  • Install in accordance with Abodo CodeMark Weatherboard Cladding Manual. 3.6 HANDLING OF STAIN FINISHED TIMBER
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 30 of 149 Application - preparation
  • Seal all cut edges of weatherboards, fascia, corner boards and finishing profiles with 1 coat of Abodo Protector End Seal prior to installation in accordance with manufacturer's instructions.
  • Seal all cut edges of weatherboards, fascia, corner boards and finishing profiles with Sioo:x End Seal (step 1 & 2) prior to installation in accordance with manufacturer's instructions.
  • 3.16 SETOUT VERTICAL SECRET FIX WEATHERBOARDS Lap weatherboards with 2mm expansion gap at back between each board. Setout weatherboards
  • 3.17 PRE-DRILL FIXINGS - FACE FIXED WEATHERBOARDS Setout weatherboard fixings, one fixing per nog/cavity batten, positioned 10mm off lap of adjacent
  • 3.18 PRE-DRILL FIXINGS - SECRET FIXED WEATHERBOARDS Setout weatherboard fixings, one fixing per nog/cavity batten, positioned 12mm from edge of the
  • 3.19 FIX WEATHERBOARDS - NON STRUCTURAL CAVITY BATTEN Fix weatherboards through cavity batten and underlay with 30mm minimum embedment into
  • framing. Finish fixings flush to weatherboard surface. CRITERION GROUP Criterion Limited 47 Robins Road 357661
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 31 of 149 4 SELECTIONS
  • 3.20 FIX WEATHERBOARDS - STRUCTURAL CAVITY BATTEN Fix weatherboards with 30mm minimum embedment into structural cavity batten/framing. Finish
  • fixings flush to weatherboard surface. 3.21 FIX WEATHERBOARDS - NON COMBUSTIBLE CAVITY BATTEN
  • Fix weatherboards with 8g hot dipped galvanised HDG wing tip screws, ensuring minimum penetration of three threads deep into steel battens. Finish fixings flush to weatherboard surface.
  • apply sealant to join face and fix weatherboards with one secret nail pre-drilled 12mm minimum from each side of the join. Stagger joins 450mm minimum.
  • Fix internal/external corner moulds and butt weatherboards to moulding with sealant to join. 3.25 FIX BOX CORNER COVER BOARDS
  • 50mm minimum weatherboard cover and nail fix. 3.26 NOTCH EXTERNAL CORNERS
  • Router 9mm x 9mm tongue & groove notches in weatherboard vertical edges at external corners. Pre-drill holes in boards for fixings through notched joint, 1mmØ smaller than fixing gauge. Apply
  • Nail fix eaves moulds to weatherboards. 3.28 FIX FASCIA BOARDS
  • For further details on selections go to www.abodo.co.nz Substitutions are not permitted to the following, unless stated otherwise.
  • 4.1 ABODO THERMALLY MODIFIED RADIATA PINE FSC CERTIFIED SUSTAINABLE TIMBER Product: Abodo Vertical Cladding products
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 32 of 149 Vulcan Cladding
  • 4.2 ABODO VULCAN VERTICAL SHIPLAP WEATHERBOARDS Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: WB18 - 135mm x 18mm (115mm cover)
  • 4.3 ABODO VULCAN COVER BOARD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW92 - 90mm x 20mm
  • 4.4 ABODO VULCAN FASCIA BOARD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW72 - 180mm x 25mm
  • 4.5 ABODO VULCAN CORNER MOULD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW43 - 40mm x 40mm x 19mm internal/external L corner mould
  • (suitable for WB18 weatherboards) Series/Grade: Architectural Series - Vulcan
  • 4.6 ABODO VULCAN EAVES MOULD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW32 - 40mm x 27mm (6mm chamfer to one corner)
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 33 of 149 4.8 CAVITY BARRIERS
  • Supplier: Abodo Wood Type: Abodo AWF6 - 45mm cavity closer (suitable for WB10/WB18
  • weatherboards only) Material: 304 Stainless Steel, 0.45mm minimum thickness
  • Brand: Abodo Product: Protector Waterborne Stain and Protector End Seal
  • © CIL Masterspec Aug 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 34 of 149 1 GENERAL
  • James Hardie Axon™ Panel, face primed shiplap jointed panels, 9.0mm and 8.5mm thick, manufactured from cellulose fibre reinforced cement to AS/NZS 2908.2. Refer to SELECTIONS.
  • Avoid distortion and contact with potentially damaging shiplap edges and surfaces. Do not drag panels across each other, or across other materials. Protect edges, corner and surface finish from
  • TANZ appraisal 12124 - Atlantis Linea Quattro shower base - expires 14/03/2027 TANZ appraisal 12125 - Atlantis EasyTile shower base - expires 14/03/2027

Project Specifications (PDF, 3.1MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.