← Board

12 Anderson Heights Queenstown 9300

Queenstown Lakes · property 6823 · Sec 4 BLK XLVIII TN OF Queenstown - 0.096900 Ha CT- OT4B/751

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
BC261484 Building Construction Of 21 Multiunit Dwellings, Between 2&4 Stories, Across Block A E. Majority Of Units Are Dual Key Units With Seperate Ground Floor Suite. Application Complete

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261484 read 18 Nov 2026

Value of work
$13m estimated on the application form, GST included
Designer
Foley Group Architecture Ltd
info@foleygroup.co.nz
03 3775 666
Engineer
Structural Design Lab Ltd.
hamish@structuraldesignlab.co.nz
027 260 4088
Lodged by
Foley Group Architecture Ltd (Architect)
info@foleygroup.co.nz
juels@solsticeqt.nz
03 375 666
Applicant
Owner
greg@wintermiles.nz
021333265
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • vertical weatherboard profiles and vertical metal corrugated and trapezoidal claddings.
  • 84. Timber weatherboard claddings shall comply with section 9.4 acceptable solution E2 of the NZBC.
  • 85. Fibre cement weatherboard claddings shall comply with section 9.5 acceptable solution E2 of the NZBC.
  • weatherboards and exterior joinery at time of painting, 18% for reconstituted wood products, and for concrete
  • James Hardie Oblique Weatherboard fixed horizontally.
  • Horizontal Oblique Weatherboard over 20mm H3.1 cavity battens over selected
  • Vertical Oblique Weatherboard over 20mm H3.1 cavity battens over selected
  • Weatherboard, fixed vertically over Hardie horizontal cavity batten per
  • corner mould and Linea Oblique weatherboard.
  • Weatherboard, fixed horizontally over Hardie vertical cavity battens as
  • Cut the long edges of the linea Oblique weatherboard to butt into
  • Linea Oblique aluminium external box corner.
  • box corner and Linea Oblique weatherboard.
  • Oblique Weatherboards. Selected plasterboard interior wall
  • JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING JAMES HARDIE® STRIA™ CLADDING
  • 4231HO James Hardie® Oblique™ Weatherboard Cladding 4231HS James Hardie® Stria™ Cladding
  • 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING This section relates to the supply and fixing of Oblique™ Weatherboard cladding.
  • Oblique™ Weatherboard by James Hardie® Cavity Cladding System
  • Oblique™ Weatherboard Horizontal Installation Technical Specification (March 2026) Oblique™ Weatherboard Vertical Installation Technical Specification (March 2026)
  • Oblique™ Weatherboard Vertical Installation to Hardie™ 40mm Structural Horizontal Cavity Batten Technical Specification (March 2026)
  • BRANZ Appraisal 1231 (2022) - Oblique™ Weatherboard (Horizontal) Cavity Cladding - amended 31 March 2026
  • BRANZ Appraisal 1232 (2022) - Oblique™ Weatherboard (Vertical) Cavity Cladding - amended 31 March 2026
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 94 of 275 Warranties
  • 25 years For Oblique™ Weatherboard products (refer to James Hardie® product warranty)
  • Oblique™ Weatherboard Care and Maintenance guide. Provide this information prior to practical completion.
  • 1.10 OBLIQUE™ WEATHERBOARD INSTALLATION CHECKLIST Installer to complete, sign and provide a James Hardie® Installation Checklist.
  • James Hardie® Oblique™ Weatherboard meets the requirements of the NZBC when used within the Conditions and Limitations of its Certificate of conformity CMNZ30147.
  • James Hardie® Oblique™ Weatherboard cladding tested to AS/NZS 3837 and to specific requirements of C/AS1 or C/AS2 achieving Type A classification (peak heat release rate ≤ 100
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 95 of 275 2 PRODUCTS
  • 2.1 OBLIQUE™ WEATHERBOARDS Oblique™ Weatherboards, rusticated profile, 14mm thick, available in 200mm or 300mm widths and
  • Aluminium moulding used beside window opening to end butt the Oblique™ Weatherboard. 2.8 HARDIE™ 14MM ALUMINIUM TRIMLINE JOINT FLASHING
  • 2.11 WEATHERBOARD INTERNAL "W" CORNER Anodised aluminium extrusion to flash behind cladding at internal corners.
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 96 of 275 3 EXECUTION
  • Oblique™ Weatherboards over battens over rigid air barrier. 2.17 FLEXIBLE SEALANT
  • weatherboards are fixed. Application - particular installations
  • 3.5 INSTALL CAVITY BATTENS - OBLIQUE™ HORIZONTAL WEATHERBOARDS Install 20mm minimum thick cavity battens to NZBC E2/AS1, 9.0 Wall claddings, where required.
  • 3.6 INSTALL CAVITY BATTENS - OBLIQUE™ VERTICAL WEATHERBOARDS Install 20mm thick Hardie™ Horizontal Cavity Battens. Fix horizontal cavity battens to wall framing
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 97 of 275 4 SELECTIONS
  • 3.8 INSTALL OBLIQUE™ WEATHERBOARDS - HORIZONTAL INSTALLATION Cut weatherboards to required lengths for vertical jointing. Prime site cut ends that are exposed
  • prior to installation. Fit vertical jointers, internal and external corners and fix weatherboards as per Oblique™ Weatherboard Horizontal technical specifications.
  • 3.9 INSTALL OBLIQUE™ WEATHERBOARDS - VERTICAL INSTALLATION Cut weatherboards to required lengths. Prime site cut ends that are exposed prior to installation.
  • Fit joint flashing, internal corners and external corners and fix weatherboards as per Oblique™ Weatherboard Vertical technical specifications.
  • 4.1 JAMES HARDIE® OBLIQUE™ WEATHERBOARDS Location: refer to drawings.
  • Type/Brand: Oblique™ Weatherboards Thickness: 14mm
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 98 of 275 Finishing
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 99 of 275 1 GENERAL
  • 4.2 EXTERIOR OBLIQUE™ WEATHERBOARD NEW - PAINT Gloss level: Low Sheen

Plans - Architectural (PDF, 48.0MB)Project Specifications (PDF, 2.2MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.