← Board

32 Fryer Street Queenstown 9300

Queenstown Lakes · property 6624 · Lot 21 DP 8591 - 0.080900 Ha CT- OT1D/884

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260771 Resource Visitor Accommodation Activity (Under Odp) For Up To 365 Nights Per Year Within 7 Two-Bedroom Units Approved By Previous Decision Rm251094, With Associated Parking Infringements At 32 Fryer Street, Queenstown Boutique Living Queenstown Limited Decision Issued 14 Aug 2026
RM260750 Resource S127 To Change Conditions 1 Of Rm251094 At 32 Fryer Street, Queenstown Boutique Living Queenstown Limited Decision Issued 31 Jul 2026
BC261377 Building Construction Of 7 X Two Storey Multiunit Dwelling Granted
RM251094 Resource Application Under Section 88 Of The Resource Management Act 1991 (Rma) To Establish A Multi-Unit Development Consisting Of Seven Residential Units, With Associated Breaches To Density, Height, Building Length And Transport Standards At 32 Fryer Street, Queenstown Boutique Living Queenstown Limited Decision Issued 18 May 2026
MN251094 Boutique Living Queenstown Limited - Application Under Section 88 Of The Resource Management Act 1991 (Rma) To Establish A Multi-Unit Development Consisting Of Seven Residential Units, With Associated Breaches To Density, Height, Building Length And Transport Standards At 32 Fryer Street, Queenstown Awaiting Officer Review
RM030275 Resource Erect A Garage Into The Boundaries At Fryer Street, Queenstown C Mccorkindale Issued 22 May 2003
BC020832 Building Additions To House - Subject To Modification Of B2.3.1 Which Applies From The 30Th Of Oct 2014 Instead Of The Date Of Code Compliance Certificate Issue CCC Issued 30 Sep 2022
BC970382 Building Install Fire Appliance Building Consent Issued 15 May 1997

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261377 read 18 Nov 2026

Value of work
$1.6m estimated on the application form, GST included
Designer
Julia Mercer
julia@elbowarchitects.com
021 771 734
Engineer
Andre Boiser
andre@filengineers.co.nz
021 2130698
Licensed: Design
Andre Boiser - Engineer
Lodged by
Julia Mercer / Elbow Architects Limited (Architect)
julia@elbowarchitects.com
021 771 734
Applicant
Owner
trent@boutiqueliving.co.nz
027 469 1947
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • Timber Weatherboard Cladding..........................................................................................51 Masons NZ Ltd Wall Underlays, Tapes & Accessories .........................................................55
  • 3617:1979(NZS) Specification for profiles of weatherboards, fascia boards, and flooring
  • - Cedar Clears (Western Red Cedar, Thuja plicata) - Rimu - (NZ Red Pine)
  • 5.6 Timber Weatherboard Cladding 5.6.1 Scope
  • Supply and install the selected Timber Weatherboard Cladding type(s) to the locations shown on the drawings, complete with all accessories. All aspects of this work shall be carried out to comply with
  • 5.6.2 Horizontal Weatherboard Profile Splay Profile Rusticated Weatherboard: ex.150mm x 25mm, machined to NZS 3617 and/or BRANZ
  • 5.6.3 Vertical Weatherboard Profile Vertical Shiplap Weatherboard: ex.150mm x 25mm, machined to NZS 3617 and/or BRANZ Bulletin
  • Splay Profile Rusticated Weatherboard shall be run from H3.1 treated, dressing-grade Pinus Radiata clears. Durability shall be to NZS 3602 Table 2A and NZBC B2/AS1, and materials compatibility
  • Handle the weatherboards carefully to avoid damage to edges and faces, store flat and keep packaged until required for installation, and check that the boards moisture content at installation is
  • Vertical Shiplap Weatherboard shall be run from face-dressed, dressing heart grade, premium clears Western Red Cedar. Durability shall be to NZS 3602 Table 2A and NZBC B2/AS1, and materials
  • 5.6.5 Weatherboard Finish Splay Profile Rusticated Weatherboards run from H3.1 treated Pinus Radiata shall be pre-primed to
  • Vertical Shiplap Weatherboards run from Western Red Cedar shall be pre-coated with a factory- applied oil stain finish - as specified, clear or coloured.
  • Co-ordinate with other trades to ensure that the weatherboards correctly allow for door and window installation, and for the locations of pipes, outlets, and fittings installed by others.
  • Horizontal Weatherboards Cavity-Fixed on Timber Framing - check all aspects of preparatory works, including, but not limited to:
  • is correctly in place, and has a maximum moisture content of 20% at the time of weatherboard cladding installation.
  • weatherboard cladding installation. Elbow Architects Fryer Street Townhouses Issued for Tender/Consent
  • works have been completed that will enable the weatherboards to be installed, and that the work of other trades does not negatively impact on or reduce the minimum clearances required by the NZ
  • Vertical Weatherboards Cavity-Fixed on Timber Framing - check all aspects of preparatory works, including, but not limited to:
  • correctly in place, and has a maximum moisture content of 20% at the time of weatherboard cladding installation.
  • and appropriate for the weatherboard cladding installation. - For cavity construction without a rigid wall underlay and where the studs are at greater than
  • Fix pre-primed Rusticated Weatherboards with Grade 316 stainless steel, annular grooved jolt head nails, length to embed minimum 35mm into the framing, holes pre-drilled 1mm less than the nail
  • Install the weatherboards with one nail positioned 10mm above the top of the lower board at each stud, and with a 2mm gap at all butted weatherboard edges. Punch nails 3mm below the board
  • Fix stained or bare finish Vertical Shiplap Weatherboards with Grade 316 stainless steel, annular grooved flat head nails, length to embed minimum 35mm into the framing, holes pre-drilled 1mm less
  • Install the weatherboards with one nail positioned 10mm clear of the lap (35mm - 40mm from the Elbow Architects Fryer Street Townhouses Issued for Tender/Consent
  • board edge) at each nog/dwang line, and with a 2mm gap at all butted weatherboard edges. Neatly bed the nail head onto the board surface - not into or below the surface. All soakers and flashings
  • 5.6.9.1 Rusticated Weatherboard - Cavity Fix Back flash all internal and external corners as detailed.
  • Carefully set-out Rusticated Weatherboard cladding horizontally over the cavity battens and fix the base weatherboard to the framing, level and true to line along the base line, 50mm minimum or as
  • weatherboards over the cavity battens and fix to the framing, keeping cladding lines consistent, level and true along walls and around corners.
  • Install full length weatherboards where possible. Where joints are unavoidable, scarf the weatherboards at 45º and fix to solid framing through the overlapping board just clear of scarf join -
  • stagger weatherboard joints to avoid clustering. Where boards are coated, ensure all cut ends and fresh timber is double coated with a suitable sealer/primer.
  • Finish Rusticated Weatherboards, weatherboard trim, flashings and accessories at internal and external corners, window and door openings, parapets, and at junctions with other building elements
  • 5.6.9.2 Vertical Shiplap Weatherboard - Cavity Fix Back flash all internal and external corners as detailed.
  • Carefully set-out Vertical Shiplap Weatherboard cladding vertically over the fluted/castelated horizontal cavity battens, to straight plumb lines, and fix to the framing with side laps directed away
  • bottom plate or floor structure. Install full length weatherboards boards where possible. Where joints are unavoidable, scarf the weatherboards at 45º and fix to solid framing through the top
  • Check for and eliminate any creep and/or spread of shiplap weatherboards during installation. Finish Standard Vertical Weatherboards, weatherboard trim, flashings and accessories at internal and

Project Specifications (PDF, 1.6MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of RM251094 read 19 Nov 2026

Lodged by
Baseline Group, Sally Elford
sally@blg.nz
033390401
021 333 9507
Applicant
Boutique Living Queenstown Limited
trent@boutiqueliving.co.nz
0274691947
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
Not mentioned in the documents read