← Board

64 Totara Terrace Wanaka 9305

Queenstown Lakes · property 642 · Lot 94 DP 10245 - 0.097900 Ha CT- OT2D/66

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM261186 Resource Application To Construct A Residential Unit Exceeding Site Standards Relating To Recession Planes And Building Length; And Earthworks Standards Relating To Maximum Volume And Proximity To Boundary At 64 Totara Terrace, Wanaka H & C Barron Waiting for Further Information
PM260011 Proposed New 4 Bedroom Home With Attached Garage. Includes Installation Of Freestanding Fireplace PIC/PIM Issued
BC260660 Building Proposed New 4 Bedroom Home With Attached Garage. Includes Installation Of Freestanding Fireplace And Swimming Pool Waiting for Further Information
RM200278 Resource Withdrawn - Application For A Boundary Adjustment Subdivison With Associated De-Amalgamation And Amalgamation Processes At 64 & 68 Totara Terrace, Wanaka C & H Barron And J & S Squires Withdrawn

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of RM261186 read 18 Nov 2026

Lodged by
Gemma Conlon
0212374038
Applicant
H & C Barron
corey@spytower.co.nz
021 725 979
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • incorporates a combination of weatherboard cladding, plaster finishes, and metal elements, and has been articulated to reduce perceived bulk and
  • (VERTICAL WEATHERBOARD @480max.crs).
  • weatherboard feature wall. plaster
  • weatherboard feature wall. Proposed Floor Framing Plan As shown.
  • weatherboard feature wall. hardwood
  • SELECTED VERTICAL SHIPLAP WEATHERBOARD WALL
  • WEATHERBOARDS. EXISTING GROUND LINE
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 20mm
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 45mm
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 90x45 H1.2

AEE (PDF, 0.6MB)Plans (PDF, 4.3MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC260660 read 18 Nov 2026

Value of work
$1.7m estimated on the application form, GST included
Designer
IDSGN Architecture 2025 LTD - Lisa Southby
lisa@idsgn.nz
021 911 425
Licensed: Design
Glenn Allan
Lodged by
IDSGN Architecture 2025 LTD - Lisa Southby (Architectural Designer)
lisa@idsgn.nz
021 911 425
Applicant
Owner
corey@spytower.co.nz
021725979
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • (VERTICAL WEATHERBOARD @480max.crs).
  • weatherboard feature wall. plaster
  • weatherboard feature wall. Proposed Floor Framing Plan As shown.
  • weatherboard feature wall. hardwood
  • SELECTED VERTICAL SHIPLAP WEATHERBOARD WALL
  • WEATHERBOARDS. EXISTING GROUND LINE
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 20mm
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 45mm
  • SELECTED VERTICAL SHIPLAP TIMBER WEATHERBOARD SYSTEM OVER 90x45 H1.2
  • WEATHERBOARD. FOAM BOND BREAKER
  • WEATHERBOARD. A B O D O V E R T I C A L S H I P L A P W E A T H E R B O A R D
  • ABODO CORNER MOULDING GLUED and SEALED TO
  • WEATHERBOARDS 75x75 ALUMINIUM BACK
  • ABODO CB-H-20x45 NOTCHED and BEVELLED
  • ABODO VULCAN VERTICAL SHIPLAP WEATHERBOARD.
  • SHIPLAP SOFFIT LINING FIXED OVER 20mm H3.1 BATTENS
  • WEATHERBOARD. 4.5mm JAMES HARDIE
  • WEATHERBOARD. ABODO CB-H-20x45
  • ABODO SCRIBER SEALED TO FLASHING WITH FLEXIBLE
  • framing with a combination of vertical Colorsteel Kahu profile metal, Abodo vertical shiplap weatherboard and RCS concrete look plaster wall cladding systems. Low pitch timber roof trusses
  • ABODO Vulcan Cladding - Vertical Grain - Series ................................................................92 GIB® Rondo® Metal Batten Systems .................................................................................102
  • Abodo Wall Cladding System ............................................................................................203 Metalkraft Kahu Technical Documents .............................................................................203
  • Abodo Architectural Series TDS.........................................................................................203 CodeMark Certificate of Conformity No.CM70046 - Abodo Weatherboard Cladding......203
  • 3617:1979(NZS) Specification for profiles of weatherboards, fascia boards, and flooring
  • - Cedar Clears (Western Red Cedar, Thuja plicata) - Rimu - (NZ Red Pine)
  • 6.8 ABODO Vulcan Cladding - Vertical Grain - Series 6.8.1 Scope
  • Supply and install ABODO Vulcan Cladding - Vertical Grain, as specified herein, to the locations identified on the drawings, complete with all system components and accessories required for proper
  • installation and performance. All aspects of this work shall be in complete accordance with ABODO product literature (check abodo.co.nz, or email info@abodo.co.nz, or call 09 249 0100 for the latest
  • specification, the Abodo CodeMark Weatherboard Cladding System Manual (2020) publication is referred to as the 'ABODO Cladding Manual'.
  • ABODO Vulcan Cladding is CodeMark assured to comply with the New Zealand Building Code:CodeMark Certificate of Conformity No.CM70046 Rev1, issued by Bureau Veritas New Zealand.
  • ABODO Vulcan Cladding must be applied within the conditions and limitations of the Abodo Weatherboard Cladding CodeMark Certificate of Conformity
  • No substitutions are permitted for ABODO Weatherboard Cladding. The following is a list and a general description of the extent of the ABODO Vulcan Cladding - Vertical
  • ABODO Wood Ltd 'Built-to-Last Warranty': - 25 Year Warranty (pro rata) - for all ABODO Vulcan Cladding materials installed, according to the
  • http://www.abodo.co.nz/uploads/resource/Vulcan-25-Year-Warranty.pdf - Provide the ABODO Wood Ltd 'Built-to-Last Warranty' on the manufacturer's standard warranty
  • ABODO Vulcan Cladding - Vertical Grain shall be as specified herein and as indicated on the approved drawings. The substitution of ABODO Vulcan Cladding - Vertical Grain for alternative brands is not
  • The substitution of a specified ABODO wood product for an alternative ABODO wood branded product by the Contractor shall only be permitted with the Architect's/Designer's written
  • and/or redesign work be required to accommodate alternative ABODO wood branded products to satisfy design, performance and compliance requirements, then the cost of these shall be borne by
  • it shall be rejected. Rejected ABODO Vulcan Cladding - Vertical Grain - Series materials and work shall be repaired and/or replaced to the satisfaction of the Architect/Designer, without delay and at no
  • Should a problem be encountered with any ABODO Vulcan Cladding - Vertical Grain - Series during use or delivery, immediately contact ABODO Wood on 09 2490 100. Do not continue to use the
  • The quality of the ABODO Vulcan Cladding - Vertical Grain - Series timber needs to be assesed against the Abodo timber grading rules:
  • https://www.abodo.co.nz/uploads/resource/Appearance-Grades-Timber-Grading-Rules-Abodo- Wood.pdf
  • https://www.abodo.co.nz/uploads/resource/Abodo-Guidelines-for-Vulcan-Cladding-Standard-Series- Clear-2-Laminated-Grade.pdf
  • 6.8.3 ABODO Vulcan Cladding - Vertical Grain 6.8.3.1 Vulcan Cladding - Vertical Grain - Architectural Series
  • ABODO Weatherboard Cladding, including weatherboards and timber mouldings, shall be manufactured from Vulcan Cladding - Vertical Grain -Architectural Series thermally modified Radiata
  • the front face and edges with Abodo Protector Water Borne or other approved proprietary wood stain.
  • Vulcan Weatherboard Profile: Refer to specific Weatherboard Profile clause For optimal coating performance on bandsawn finish apply a further coat of oil after 12 months of
  • Abodo Protector pigmented stain Sioo: x coating
  • 6.8.4 Architectural Series - Weatherboard Profile & Orientation 6.8.4.1 Vertical - WB18 135x18 (115mm cover) - Vulcan Cladding:
  • interlocking weatherboard, band sawn face or optionally with brushed face. Installed vertically to the locations and details shown on the approved drawings in accordance with the Abodo Cladding
  • ABODO Wood Internal Corner Mould - AW41: 20 x 20mm and/or 40 x 40mm D4S (as detailed on the approved drawings). Supplied by ABODO, and selected to match the specified cladding material.
  • Installed to the locations and details shown on the approved drawings in accordance with the ABODO Cladding Manual.
  • see TDS https://www.abodo.co.nz/uploads/resource/TDS/Technical-Data-Sheet-Vulcan-Cladding- Abodo-Wood-New-Zealand.pdf
  • ABODO Vulcan Cladding weatherboards and timber mouldings shall be supplied factory-coated with 3 coats of Sioo:x Wood Protector, applied to all faces and edges. Care must be taken on site to ensure
  • All site-cut ends, notches and holes in ABODO Vulcan Cladding weatherboards and timber mouldings must be sealed with Sioo:x End Seal step 1 and step 2.
  • Weatherboard Joint Flashing Tape. 50mm wide self adhesive polythene tape. Applied to the back face of scarfed weatherboard joints, prior to fixing, in accordance with the ABODO Cladding Manual.
  • adhesive. Use to seal and adhere ABODO weatherboards and accessories in accordance with the sealant manufacturer’s recommendations and the ABODO Cladding Manual.
  • Flashings used in conjunction with the ABODO weatherboard cladding system shall be manufactured from Grade 5005 H32 aluminium coil, 0.70mm thick, and formed to suit the details indicated on the
  • approved drawings in accordance the ABODO Weatherboard Cladding Manual. Flashing materials shall comply with the requirements of NZBC E2/AS1 Tables 20, 21 and 22.
  • Standard concealed metal corner (internal/external) back flashings for ABODO weatherboard cladding systems include:
  • Unhemmed metal corner back flashings may be used with flat profile weatherboards (Hector, Rusticated) provided minimum 75mm cover is obtained the behind weatherboards.
  • 6.8.9.1 Timber Cavity Battens, 20mm Cavity - Vertical Weatherboards: Timber Cavity Battens (non-structural) - to form a nominal 20mm deep drained cavity for vertical
  • weatherboards - ABODO CB-H-20x45 Castellated Cavity Battens. 45 wide x 20mm thick, H3.1 treated Radiata pine, bevelled and castellated cavity battens, incorporating 25mm wide x 6mm deep rebates
  • Fixing to Lightweight Steel Framing (painted weatherboards only): - Fix castellated cavity battens to lightweight steel framing Refer to NASH Building Envelope Solutions
  • ABODO Cladding Manual. 6.8.10 Cavity Base Closer
  • inter-storey junctions. Installed in accordance with the ABODO Weatherboard Cladding Manual to the locations and details shown on the drawings.
  • completed in accordance with the ABODO Vulcan Cladding Manual. Coordinate with trades the locations of pipes, outlets, cables, meter boards and other fittings
  • installed by others, and to install ABODO Weatherboard Cladding as required. IDSGN Architecture Proposed New House - Barron
  • with ABODO Vulcan Cladding Manual and to fully comply with all warranty requirements. All work shall be such as to leave a neat, efficient, robust and weathertight installation, to the
  • Store ABODO Vulcan Cladding and accessories undercover, flat and true, clear of the ground by at least 100mm and supported on dry and clean timber bearers spaced at maximum 900mm centres in
  • accordance with Abodo recommendations. Keep stored ABODO Cladding and accessories dry and protected from damage and contamination.
  • ABODO cladding product, immediately contact ABODO on 09 249 0100 with affected timber packet number and order number. Do not continue to use the product that is not performing to specification
  • Handle weatherboards in accordance with the manufacturer's recommendations and in a manner that prevents damage and surface marking. Abodo requires the use of gloves when handling raw
  • AS/NZS 1170 for specific design, and in accordance with the requirements of the ABODO Cladding Manual.
  • Install ABODO Vulcan Cladding, complete with all system components and accessories required for proper installation and performance, in accordance with the ABODO Cladding Manual and as shown
  • Ensure that the current, up-to-date ABODO technical literature is readily available on site for reference during installation. Where there is any doubt, contact Abodo Wood on 09 249 0100 or
  • email info@abodo.co.nz. ABODO Vulcan cladding and timber mouldings must be sealed with at least one coat all four sides
  • prior to fixing. Ensure that all site-cuts to weatherboards and timber mouldings are properly sealed with an approved coating in accordance with ABODO requirements.
  • All internal and external cladding corner junctions, inter-storey junctions, and weatherboard trim and accessories, shall be constructed and installed to the details shown on the drawings.
  • General installation of vertical ABODO Vulcan WB12/WB18 Cladding: Over the flexible wall underlay, install and fix the specified cavity battens and cavity closure to wall
  • accordance with the ABODO Cladding Manual. Carefully set-out and secret-fix Vulcan WB12 Cladding to the wall framing through the cavity battens,
  • ABODO Cladding Manual and as detailed on the drawings, keeping cladding lines plumb, straight and true.
  • Always use full length weatherboards where possible. Where joints are unavoidable, joints shall be formed over a nog/dwang line and cavity batten, and with 50mm wide PVC flashing tape applied to
  • the back face of the boards along the joint. Weatherboard joints shall be scarfed at 35º, centred over the double dwangs/nogs, and fixed with a single fixing located minimum 12mm from the end (front
  • weatherboard cladding shall be constructed and made weathertight as detailed on the drawings in accordance with the ABODO Cladding Manual.
  • Fix ABODO Secret Fix Cladding (WB12, WB18) to lightweight steel framing in accordance with ABODO fixing requirements and as shown on the drawings.
  • - To Timber: Fix ABODO Timber Mouldings to timber using 40-50mm x 2.8mm Hot-Dip Galvanised Steel Jolt Head Nails. Punch jolt head nails 2mm below the surface. Ensure all jolt head nail holes are
  • - To Steel: Fix ABODO Timber Mouldings to steel using 10g x 40mm Hot-Dip Galvanised Steel, CSK Rib Head, Self-Drilling Wing Tek Screws. Set countersunk screws heads 2mm below the board surface.
  • Check that the ABODO Vulcan Cladding - Vertical Grain - System has been correctly installed and fixed to the layout and details shown on the drawings and in accordance with the requirements of the
  • ABODO Cladding Manual. Check that all joints, associated trim and accessories are correct, that junctions with other materials
  • ABODO Wood Ltd 'Built-to-Last Warranty'. IDSGN Architecture Proposed New House - Barron
  • ABODO Vulcan standard warranty conditions. Leave the completed works and surrounding surfaces clean and free of debris and rubbish. Remove
  • Complete and sign the Restricted Building Work (RBW) memorandum, and the ABODO Wood Weatherboard Cladding System Quality Assurance Checklist. Issue a copy of the RBW document to
  • Issue to the Owner a copy of the ABODO Vulcan Cladding maintenance requirements, and a copy of ABODO Wood Ltd 'Built-to-Last Warranty'.

Plans (PDF, 3.9MB)Project Specifications (PDF, 0.9MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.