← Board

13 Pendeen Crescent Jacks Point 9371

Queenstown Lakes · property 24400 · Lot 4145 DP 380605 - 0.103900 Ha CT- 322820

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260906 Resource Section 221 Variation To Consent Notice 7815334.2 As It Relates To Maximum Building Height At 13 Pendeen Crescent, Jacks Point, Queenstown S & R Frame Decision Issued 10 Sep 2026
BC261460 Building Construction Of A Part Two Storey Dwelling With Attached Double Garage. Waiting for Further Information
BC171193 Building 13 Pendeen Crescent, Jacks Point, Queenstown - Construction Of A Three Bedroom Dwelling With An Attached Garage Lapsed 1 Dec 2017

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261460 read 18 Nov 2026

Value of work
$1.5m estimated on the application form, GST included
Designer
Richard Pearce
richie@immersion.nz
0210536241
Licensed: Design
Richard Pearce BP114344
Lodged by
Richard Pearce (Architectural Designer)
richie@immersion.nz
0210536241
Applicant
Owner
contemporarybuildnz@gmail.com
0221769491
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • Vertical Shiplap weatherboard on cavity Siberian Larch
  • Vertical Shiplap Square Edge Siberian Larch
  • Selected Vertical Shiplap weatherboard Selected Grooved Ceiling Lining -
  • Vertical Timber Weatherboard Cladding 'Silvered Off Appearance'
  • Vertical Timber Weatherboard Cladding - Silvered off look
  • Vertical Timber Weatherboard Cladding
  • Vertical Timber Weatherboard Cladding Silvered Off.
  • Vertical shiplap weatherboard on 45mm cavity over Wraps +
  • Vertical Shiplap, 45mm Horizontal timber cavity batten.
  • Selected vertical shiplap timber weatherboard
  • Vertical Shiplap Weatherboard Vertical Shiplap Weatherboard
  • INTERNAL CORNER SHIPLAP TO WINDOW 3
  • INTERNAL CORNER IN SHIPLAP 4
  • SHIPLAP RETURN TO DOOR JAMB 6
  • SCHIST CLAD WALL TO CEDAR 5
  • Vertical Shiplap, 45mm Horizontal timber cavity batten. Fixed horizontal
  • BASE OF CEDAR AT MAXSLAB 4
  • SHIPLAP SOFFIT 2
  • BASE OF CEDAR AT ICF 8
  • Shiplap boards to match cladding on 70x45 H1.2 battens at 400crs
  • SHIPLAP Soffit at Cantilever 4
  • Bottom of Cedar at ICF Wall 5
  • Shiplap boards to match cladding on 70x45 H1.2
  • WINDOW HEAD IN SHIPLAP 3
  • WINDOW SILL IN SHIPLAP 4
  • WINDOW JAMB IN SHIPLAP 5
  • Brand/Type: Vertical Shiplap Timber WeatherBoard - Siberian Larch Fixings: TBD
  • 2.1 TIMBER WEATHERBOARD As selected, or radiata pine to NZS 3631 for grading and to NZS 3602, table 2 Requirements for
  • 3.5 PRIME OR SEAL TIMBER WEATHERBOARDS Prime (for opaque finish) or seal (for clear finish) front and back faces, edges and end grain
  • (minimum 2 coats) before fixing weatherboards and exterior trim. 3.6 INSTALL TIMBER WEATHERBOARDS
  • Install level, true to line and face, to NZBC E2/AS1, 9.4 Timber weatherboards. 3.7 INSTALL FIBRE CEMENT SOFFITS

Plans - Architectural (PDF, 10.3MB)Project Specification (PDF, 1.4MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.