← Board

21 Angus Rise Jacks Point 9371

Queenstown Lakes · property 200970 · LOT 1192 DP 629299 - 0.074300 Ha CT- 1288637

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
BC261529 Building Construction Of Single Storey Multiunit Dwelling With Attached Garage Application Complete

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261529 read 18 Nov 2026

Value of work
$700k estimated on the application form, GST included
Designer
Shaneil Narsey
shaneil.n@youngrichards.com
022 6035274
Licensed: Design
Shaneil Narsey
Lodged by
Young and Richards Limited (Architect)
shaneil.n@youngrichards.com
0226035274
Applicant
Owner
jason@fowlerhomes.co.nz
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • VERTICAL SHIPLAP TIMBER WEATHERBOARD CLADDING
  • WEATHERBOARDS 4231HO 4.1
  • SHIPLAP WEATHERBOARD 4221HV 4.2
  • • HERMPAC VERTICAL SHIPLAP CLADDING, 400MM MIN / 480MM MAX CRS. • JAMES HARDIE OBLIQUE WEATHERBOARD CLADDING AT 800 CRS (OR 600 CRS WHERE REQ. FOR FIRE
  • VERT. SHIPLAP WEATHERBOARD + BUILDING PAPER BASE OF EXTERIOR
  • VERT JH OBLIQUE WEATHERBOARD SFL
  • HARDIE™ WEATHERBOARD INTERNAL 'W' CORNER
  • JH OBLIQUE TO VERT. SHIPLAP WEATHERBOARD SCALE: 1 : 5 04
  • VERTI. SHIPLAP WEATHERBOARD CLADDING PURLIN FIXINGS:
  • VERT. SHIPLAP WB_TYP AWNING WINDOW HEAD VERT. SHIPLAP WEATHERBOARD + BUILDING PAPER
  • VERT. SHIPLAP WB_TYP AWNING WINDOW SILL VERT. SHIPLAP WEATHERBOARD + BUILDING PAPER
  • VERT. SHIPLAP WB_TYP AWNING WINDOW JAMB VERT. SHIPLAP WEATHERBOARD + BUILDING PAPER
  • VERT. SHIPLAP WB_TYP MULTI-SLIDER JAMB VERT. SHIPLAP CLADDING
  • HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM TRIM - EXTERIOR TIMBER
  • JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING JAMES HARDIE® SOFFITS
  • 4221HV Hermpac Vertical Weatherboard Cladding System 4231HI James Hardie External Fire & Acoustic Wall Systems
  • 4231HO James Hardie® Oblique™ Weatherboard Cladding 4239JH James Hardie® Soffits
  • 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM This section relates to the supply and fixing of Hermpac Vertical cladding:
  • Vertical Shiplap weatherboards Board and Batten weatherboards
  • Vertical Shiplap 'Vertibat' cavity batten systems 1.1 ABBREVIATIONS AND DEFINITIONS
  • NZS 3617 Profiles of weatherboards, fascia boards and flooring JAS-ANZ CodeMark Certification CMNZ30036 - Hermpac VertiLine Vertical Shiplap Weatherboard
  • Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System installation Specifications Hermpac Vertical Shiplap Weatherboard Direct Fix System Installation Specifications
  • Hermpac Product Technical Statement (PTS) – VertiLine Vertical Shiplap Weatherboard Cavity System (July 2023)
  • Hermpac Product Installation Checklist – VertiLine Vertical Shiplap Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac Board and Batten Weatherboard Cavity System Installation Specifications Hermpac Board and Batten Weatherboard Direct Fix System Installation Specifications
  • Hermpac Product Technical Statement (PTS) – Board and Batten Weatherboard Cavity System (July 2023)
  • Hermpac Product Installation Checklist – Board and Batten Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac WR & Yellow Cedar cuts and characteristics Young + Richards Ltd Lot 1192, Hanleys Farm 362632
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 126 of 321 2 PRODUCTS
  • BRANZ Appraisal 650 - Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System Manufacturer/supplier contact details:
  • 5 years For installation of Hermpac vertical weatherboard cladding systems Provide this warranty on the installer/applicator standard form (if not available then use the
  • Hermpac vertical weatherboard cladding systems meet the requirements of the NZBC when used within the Conditions and Limitations of their Certificate CMNZ30036.
  • 2.1 WESTERN RED CEDAR Hermpac Canadian Western Red Cedar (Thuja plicata) supplied from sustainably managed forests
  • 2.2 VERTICAL SHIPLAP / VERTICAL BOARD AND BATTEN Weatherboards to Hermpac profiles, Lap and Rebate details to BRANZ BU 411 and general design
  • wood-based building components to achieve a 15-year durability performance. Weatherboards in lengths relevant to profile selection and application, with all unsound and open split knots excluded
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 127 of 321 Acceptable Solution is limited to the following types of weatherboards and their derivatives:
  • Vertical Standard Shiplap and Hermpac Custom Profiles Vertical Standard Board and Batten and Hermpac Custom Profiles
  • A selection of the above profiles are also available in Western Red Cedar and Yellow Cedar finger-joint (CedarOne Evolve and CedarLine Evolve). CedarOne Evolve is quarter-sawn cut Cedar.
  • CedarLine Evolve is primarily flat-sawn cut Cedar. Evolve profiles are available across most standard and custom profiles. The timber is machined with a “combed” finish to the front face and
  • Western Red Cedar and Yellow Cedar. Profiles are machined with a “dressed” finish to the front face and the exposed corners are machined to paint quality - PQ (ie. rounded edges for paint
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 128 of 321 3 EXECUTION
  • All Hermpac weatherboard cladding systems will arrive on site with a minimum of one coat factory finish. Additional coat/s will be required to achieve the desired look. Ensure site coating
  • applications are to coating manufacturers specifications. All Hermpac weatherboards and mouldings must be coated with a specified coating system on all bare surfaces and ends must be
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 129 of 321 Application - preparation
  • relative to visible edge of board. For vertical shiplap boards, where possible the exposed lap should face away from the prevailing wind.
  • Install level, true to line and face, to NZBC E2/AS1, 9.4 Timber weatherboards. Double coat all cut ends before fixing. Provide one face fixing per weatherboard at each Vertibat cavity batten over
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 130 of 321 3.12 FIXING/FINISH - WIND ZONE
  • Hermpac Western Red Cedar, Yellow Cedar or DuraLarch™ weatherboards fixed with Stainless Steel or Silicon Bronze Hermpac Crown, Rose and Flat Head nails or Hermpac Starcap screws and
  • Kanda weatherboards fixed with Hermpac Starcap screws are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally fixed Vertibat cavity battens are
  • Hermpac Western Red Cedar weatherboards fixed with stainless steel jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Medium when dwangs or structurally fixed Vertibat
  • Hermpac Yellow Cedar and DuraLarch™ weatherboards fixed with jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally fixed Vertibat
  • 3.13 FIXING BOARD AND BATTEN Install level, true to line and face, to NZBC E2/AS1, 9.4 Timber weatherboards. Face fix in the
  • weatherboard batten being fixed over top (nogs or dwangs at maximum 480mm centres). Do not pin boards or battens.
  • Kanda weatherboards are fixed with Hermpac Starcap screws), correct placement of fixings, size, length and minimum penetration requirements, and for external and internal corner construction and
  • 3.15 APPLYING SEALANT TO BACK FLASHINGS & WEATHERBOARDS - SIKA Wipe weatherboard surfaces with a clean rag. Using an abrasive pad, rub down back flashings in a
  • weatherboards. Apply a continuous 5mm bead of adhesive to back flashing prior to fixing weatherboards.
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 131 of 321 4 SELECTIONS
  • 4.1 HERMPAC WESTERN RED CEDAR CERTIFIED SUSTAINABLE TIMBER Product: Hermpac Western Red Cedar products
  • Timber species: Western Red Cedar (Thuja plicata) Origin: British Columbia, Canada
  • 4.2 SELECTED TIMBER VERTICAL SHIPLAP WEATHERBOARD Location: Refer architectural drawings
  • Species: Western Red Cedar Grade: HERMPAC Premium Clears No.1 (PC1)
  • Profile type: Vertical Shiplap Cover dimensions: 110mm
  • 4.4 WEATHERBOARD FASTENINGS - SILICON BRONZE NAILS - WOOD OIL / OIL STAIN FINISH Nails: Crown Head
  • 4.5 WEATHERBOARD FASTENINGS - STAINLESS STEEL SCREWS - WOOD OIL / OIL STAIN FINISH
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 132 of 321 4.8 HERMPAC CAVITY CLOSER/VERMIN-PROOFING
  • © CIL Masterspec Oct 2026 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM | Page 133 of 321 1 GENERAL
  • This section relates to lengths of timber fixed on site, either associated with timber cladding, or used as isolated trim with other wall cladding or soffit materials:
  • Profile: Linea Sill SB 65X38 or equal approved Treatment: H3.1
  • Timber weatherboards. Please confirm with the manufacturers literature that the selected paint colour meets the LVL requirements
  • 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING This section relates to the supply and fixing of Oblique™ Weatherboard cladding.
  • Oblique™ Weatherboard by James Hardie® Cavity Cladding System
  • Oblique™ Weatherboard Horizontal Installation Technical Specification (March 2026) Oblique™ Weatherboard Vertical Installation Technical Specification (March 2026)
  • Oblique™ Weatherboard Vertical Installation to Hardie™ 40mm Structural Horizontal Cavity Batten Technical Specification (March 2026)
  • BRANZ Appraisal 1231 (2022) - Oblique™ Weatherboard (Horizontal) Cavity Cladding - amended 31 March 2026
  • BRANZ Appraisal 1232 (2022) - Oblique™ Weatherboard (Vertical) Cavity Cladding - amended 31 March 2026
  • © CIL Masterspec Oct 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 143 of 321 Warranties
  • 25 years For Oblique™ Weatherboard products (refer to James Hardie® product warranty)
  • Oblique™ Weatherboard Care and Maintenance guide. Provide this information prior to practical completion.
  • 1.10 OBLIQUE™ WEATHERBOARD INSTALLATION CHECKLIST Installer to complete, sign and provide a James Hardie® Installation Checklist.
  • James Hardie® Oblique™ Weatherboard meets the requirements of the NZBC when used within the Conditions and Limitations of its Certificate of conformity CMNZ30147.
  • James Hardie® Oblique™ Weatherboard cladding tested to AS/NZS 3837 and to specific requirements of C/AS1 or C/AS2 achieving Type A classification (peak heat release rate ≤ 100
  • © CIL Masterspec Oct 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 144 of 321 2 PRODUCTS
  • 2.1 OBLIQUE™ WEATHERBOARDS Oblique™ Weatherboards, rusticated profile, 14mm thick, available in 200mm or 300mm widths and
  • Aluminium moulding used beside window opening to end butt the Oblique™ Weatherboard. 2.6 HARDIE™ 14MM ALUMINIUM TRIMLINE JOINT FLASHING
  • 2.8 WEATHERBOARD INTERNAL "W" CORNER Anodised aluminium extrusion to flash behind cladding at internal corners.
  • Oblique™ Weatherboards over cavity battens over flexible underlay. 2.13 FLEXIBLE SEALANT
  • © CIL Masterspec Oct 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 145 of 321 3 EXECUTION
  • weatherboards are fixed. Application - particular installations
  • 3.5 INSTALL CAVITY BATTENS - OBLIQUE™ VERTICAL WEATHERBOARDS Install 20mm thick Hardie™ Horizontal Cavity Battens. Fix horizontal cavity battens to wall framing
  • 3.7 INSTALL OBLIQUE™ WEATHERBOARDS - VERTICAL INSTALLATION Cut weatherboards to required lengths. Prime site cut ends that are exposed prior to installation.
  • Fit joint flashing, internal corners and external corners and fix weatherboards as per Oblique™ Weatherboard Vertical technical specifications.
  • © CIL Masterspec Oct 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 146 of 321 For further details on selections go to www.jameshardie.co.nz.
  • 4.1 JAMES HARDIE® OBLIQUE™ WEATHERBOARDS Location: Refer drawings
  • Type/Brand: Oblique™ Weatherboards Thickness: 14mm
  • 4.5 HARDIE™ WEATHERBOARD INTERNAL 'W' CORNER Location: Refer drawings
  • Type/Brand: Hardie™ Weatherboard Internal Corner Finish: Etched primed aluminium extrusion
  • © CIL Masterspec Oct 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 147 of 321 1 GENERAL

Plans (PDF, 11.6MB)Project Specification (PDF, 3.7MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.