45 Tailrace Rise Arthurs Point 9371
Queenstown Lakes · property 196220 · LOT 52 DP 617729 - 0.050000 Ha CT- 1239790
Every consent eDocs lists on this property
| Consent | Description | Applicant | Status | Status date |
|---|---|---|---|---|
| RM260836 Resource | To Construct A Residential Unit That Breaches Light Reflectance Requirements And Earthworks Maximum Cut Depth And To Vary Conditions E And M Of Consent Notice 13408696.12 To Allow For Increased Building Height And Light Reflectance Values At 45 Tailrace Rise Rd 1, Queenstown | J Matthews & A Mcgrath | Decision Issued | 30 Sep 2026 |
| BC261421 Building | Construction Of Three Storey Dwelling With Attached Garage | Waiting for Further Information |
Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.
From the documents of RM260836 read 19 Nov 2026
- Lodged by
- Not named on the application form
- Timber cladding
-
- • Vertical Shiplap cladding - 68% and coloursteel cladding – Sandstone 27% • Joinery – Sandstone grey LRV 27%
- include the shiplap cedar that has the higher LRV. This will primarily be located inside the deck that is set back inside the building. The blockwork around the base of the building will be a dark grey and
Assessment of Environmental Effects Lot 52 (PDF, 0.4MB)
Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.
From the documents of BC261421 read 18 Nov 2026
- Lodged by
- Not named on the application form
- Timber cladding
-
- Shiplap Cedar Hermpac - HP55
- HP55 Shiplap Cedar Weatherboard
- Vertical Shiplap over 40mm Structural Cavity on Masons
- Vertical Shiplap Cladding Colour - Wood X Damper
- Shiplap soffit on 70x35 framing 0.4mm Corrugated over Vent
- Shiplap soffit on 70x35 framing Double glazed thermally
- Shiplap Soffit on 70x35 battens
- Vertical Shiplap, on 40mm Horizontal timber cavity batten
- Selected vertical cedar shiplap weatherboards fixed over
- External Corner Corrugate to Shiplap 3
- Shiplap Internal Corner 5
- Base of Shiplap 5
- Brand/Type: Cedar Vertical Shiplap 110 Cover - HP51 Fixings: 85 x 3.25mm HP Crown Head Annular Grooved Shank Nail
- Brand/Type/thickness:Cedar Vertical Shiplap 110 Cover - HP51 Fixings: 85 x 3.25mm HP Crown Head Annular Grooved Shank Nail
- 2.1 TIMBER WEATHERBOARD As selected, or radiata pine to NZS 3631 for grading and to NZS 3602, table 2 Requirements for
- 3.5 PRIME OR SEAL TIMBER WEATHERBOARDS Prime (for opaque finish) or seal (for clear finish) front and back faces, edges and end grain
- (minimum 2 coats) before fixing weatherboards and exterior trim. 3.6 INSTALL TIMBER WEATHERBOARDS
- Install level, true to line and face, to NZBC E2/AS1, 9.4 Timber weatherboards. 3.7 INSTALL EXTERIOR TIMBER FINISHINGS
Plans - Architectural (PDF, 3.6MB)Project Specifications (PDF, 1.1MB)
Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.
- Not read
- no application form (Form 2)