← Board

26 Callaghans Creek Rise Wanaka 9305

Queenstown Lakes · property 182350 · LOT 12 DP 610757 - 0.050000 Ha CT- 1212095

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
BC260078 Building Construction Of Two Storey Detached Dwelling With Attached Garage CCC Issued 13 Oct 2026
BC250125 Building Construction Of Detached Dwelling With Garage Lapsed 12 Jun 2025

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC260078 read 19 Nov 2026

Lodged by
Not named on the application form
Timber cladding
Not mentioned in the documents read
Not read
BC Application is not a Form 2

From the documents of BC250125 read 18 Nov 2026

Value of work
$750k estimated on the application form, GST included
Designer
Amy Danenberg
Engineer
Wilton Joubert
Licensed: Design
Vincent Sanders
Lodged by
Bespoke Architecture Ltd - Amy Danenberg (Designer)
amy@bespoke-architecture.co.nz
021 0250 9336
Applicant
Owner
blowkiteboarding@gmail.com
randkyulebuilders@gmail.com
021766307
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • HERMAN PACIFIC HP55 PROFILE WESTERN RED CEDAR SHIPLAP WEATHERBOARD FIXED VERTICALLY OVER 20mm H3.1 TREATED CASTELLATED TIMBER CAVITY
  • HERMAN PACIFIC CP862 PROFILE WESTERN RED CEDAR SHIPLAP WEATHERBOARD FIXED VERTICALLY OVER 20mm H3.1 TREATED CASTELLATED
  • W02 - HERMAN PACIFIC VERTICAL CEDAR SHIPLAP W03 - 150mm LONGSPUR SCHIST STONE CLADDING, 6MM HARDIES BACKING
  • VERTICAL SHIPLAP TIMBER WEATHERBOARDS ON CAVIBATS
  • BARGE TO CEDAR Scale 1:5
  • EAVE TO CEDAR Scale 1:5
  • APRON PARALLEL - CEDAR Scale 1:5
  • VERTICAL SHIPLAP TIMBER WEATHERBOARDS ON CAVIBATS (OR CASTELLATED H3.1 TIMBER
  • VERTICAL SHIPLAP TIMBER WEATHERBOARDS ON CAVIBATS (OR
  • HORIZONTAL RUSTICATED TIMBER WEATHERBOARDS ON CAVITY
  • BASE OF WALL - CEDAR Scale 1:5
  • SOFFIT DETAIL - CEDAR Scale 1:5
  • EXTERNAL CORNER - CEDAR Scale 1:5
  • STRIA TO CEDAR - VERT. JUNCTION Scale 1:5
  • SOFFIT OVERHANG - CEDAR Scale 1:5
  • CORNER JAMBS - CEDAR Scale 1:5
  • SHIPLAP RIGID AIR BARRIER
  • WINDOW HEAD - CEDAR Scale 1:5
  • WINDOW JAMB - CEDAR Scale 1:5
  • ENTRY JAMB - CEDAR Scale 1:5
  • INT. CNR - STRIA TO CEDAR Scale 1:5
  • VERTICAL SHIPLAP TIMBER WEATHERBOARDS ON CASTELLATED H3.1 TIMBER BATTENS
  • 30 DEGREE SHIPLAP WEATHERBOARDS ON CASTELLATED H3.1 TIMBER
  • ANGLED JUNCTION - CEDAR Scale 1:5
  • GARAGE DOOR HEAD - CEDAR Scale 1:5
  • GARAGE DOOR JAMB - CEDAR Scale 1:5
  • SHIPLAP 20x45mm, H3.1, CASTELLATED,
  • SHIPLAP LINE OF CONCRETE REBATE
  • EXT. CORNER - STONE TO CEDAR Scale 1:5
  • HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM JAMES HARDIE HARDIE™ FLEX SHEET CLADDING
  • 4221HV Hermpac Vertical Weatherboard Cladding System 4231HH James Hardie Hardie™ Flex Sheet Cladding
  • 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM 1 GENERAL
  • Vertical Shiplap weatherboards Board and Batten weatherboards
  • Vertical Shiplap 'VertiLine' cavity batten systems Refer to painting sections for finishes to weatherboard cladding.
  • NZS 3617 Profiles of weatherboards, fascia boards and flooring JAS-ANZ CodeMark Certification CMNZ30036 - Hermpac VertiLine Vertical Shiplap Weatherboard
  • Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System installation Specifications Hermpac Vertical Shiplap Weatherboard Direct Fix System Installation Specifications
  • Hermpac Board and Batten Weatherboard Cavity System Installation Specifications Hermpac Board and Batten Weatherboard Direct Fix System Installation Specifications
  • Hermpac Product Technical Statement (PTS) – Board and Batten Weatherboard Cavity System (July 2023)
  • Hermpac Product Technical Statement (PTS) – VertiLine Vertical Shiplap Weatherboard Cavity System (July 2023)
  • Hermpac Product Installation Checklist – Board and Batten Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac Product Installation Checklist – VertiLine Vertical Shiplap Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac Product Technical Statement (PTS) – VertiLine Vertical Shiplap – Jan 2023 V2 Hermpac Product Technical Statement (PTS) – Board and Batten – Jan 2023 V2
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 49 1.5 WARRANTY - INSTALLER/APPLICATOR
  • 2.1 WESTERN RED CEDAR Hermpac WR & Yellow Cedar cuts and characteristics
  • Declare label HMP-0003 - Western Red Cedar Declare label HMP-0006 - Yellow Cedar
  • BRANZ Appraisal 650 - Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System BRANZ Appraisal 828 - Hermpac Board and Batten Cavity System
  • 5 years For installation of Hermpac vertical weatherboard cladding systems Provide this warranty on the installer/applicator standard form (if not available then use the
  • Hermpac vertical weatherboard cladding systems meet the requirements of the NZBC when used within the Conditions and Limitations of their Certificates.
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 50 2.2 VERTICAL SHIPLAP / VERTICAL BOARD AND BATTEN
  • Hermpac Canadian Coastal Western Red Cedar (Thuja plicata) harvested from the sustainable managed forests of British Columbia, Canada. Hermpac Western Red Cedar is supplied from forest
  • Cedar - HMP-0003. Weatherboards to Hermpac profiles, Lap and Rebate details to BRANZ BU 411 and general design
  • wood-based building components to achieve a 15-year durability performance. Weatherboards in lengths relevant to profile selection and application, with all unsound and open split knots excluded
  • Acceptable Solution is limited to the following types of weatherboards and their derivatives: Vertical Standard Shiplap and Hermpac Custom Profiles
  • Vertical Standard Board and Batten and Hermpac Custom Profiles A selection of the above profiles are also available in Western Red Cedar and Yellow Cedar
  • finger-joint (CedarOne Evolve and CedarLine Evolve). CedarOne Evolve is quarter-sawn cut Cedar. CedarLine Evolve is primarily flat-sawn cut Cedar. Evolve profiles are available across most
  • Western Red Cedar and Yellow Cedar. Profiles are machined with a “dressed” finish to the front face and the exposed corners are machined to paint quality - PQ (ie. rounded edges for paint
  • Vertibat untreated Western Red Cedar, V8/V9 18mm deep x 45mm high lightweight castellated and double bevelled cavity batten, made from finger-jointed premium Western Red Cedar offcuts.
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 51 2.10 SCREWS, STAINLESS STEEL
  • Coatiing applications to manufacturers specifications. All Hermpac weatherboards and mouldings must be coated with a specified coating system on all six sides prior to installation. Refer to
  • Drained cavities and 9.4 Timber weatherboards. Take delivery of Hermpac timber products, dry, unmarked and undamaged from freight and handling
  • (Grade characteristics excluded). Stack Hermpac weatherboards flat and true, clear of the ground by a minimum of 150mm and supported on dry, clean timber bearers at maximum 900mm centres.
  • Keep weatherboards dry at all times, either by storing within an enclosed building, or when stored externally place an additional secondary cover on the plastic wrapping. Care must be taken to
  • avoid damage to weatherboard edges and surfaces. Before starting fixing ensure that the substrate conforms to NZS 3604, section 2, table 2.1 Timber
  • framing, and NZBC E2/AS1, 9.4 Timber weatherboards, governing support for timber board cladding.
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 52 3.5 VERTIBAT V8/V9 WRC DRAINED CAVITY / NON STRUCTURALLY FIXED
  • 3.11 FIXING VERTICAL SHIPLAP WEATHERBOARDS Fit Vertibat V8/V9 WRC cavity battens horizontally over wall underlay to wall framing, centred over
  • relative to visible edge of board. For vertical shiplap boards, where possible the exposed lap should face away from the prevailing wind.
  • Install level, true to line and face, to NZBC E2/AS1: 9.4 Timber weatherboards. Double coat all cut ends before fixing. Provide one face fixing per weatherboard at each Vertibat cavity batten over
  • Hermpac Western Red Cedar, Yellow Cedar, DuraLarch™ or AshinDura™ weatherboards fixed with Stainless Steel or Silicon Bronze Hermpac Crown, Rose and Flat Head nails or Hermpac Starcap
  • screws and Kanda weatherboards fixed with Hermpac Starcap screws are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally fixed Vertibat cavity
  • Hermpac Western Red Cedar weatherboards fixed with stainless steel jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Medium when dwangs or structurally fixed Vertibat
  • Hermpac Yellow Cedar, DuraLarch™ and AshinDura™ weatherboards fixed with jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally
  • Install level, true to line and face, to NZBC E2/AS1: 9.4 Timber weatherboards. Single face fix weatherboards to every fixing point, clear of the adjacent lapped board. Fixing to be driven in with a
  • Hermpac Construction Drawings for accurate weatherboard fixing information. Bespoke Architecture Ltd
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 53 3.12 INSTALL FLASHINGS
  • 4.1 HERMPAC - VERTICAL SHIPLAP 4.2 HERMPAC CORNER MOULDS, COVER BOARDS, BOXED CORNERS & SCRIBERS
  • Using a Hermpac specialty clinch nail, prior to the next row of Vertical Shiplap boards being fixed alongside (nogs or dwangs at maximum 480mm centres) and at a position hard up against but not
  • clinch nail into the cavity batten so that the clinch head settles flush into the weatherboard's surface. The clinch nail head must not sit proud of the timber surface nor prevent the correct separation of
  • each adjacent row of boards. Do not pin laps or weatherboard faces. Refer to Hermpac Construction Drawings and Installation Specification for suitable face fixings
  • Kanda weatherboards are fixed with Hermpac Starcap screws), correct placement of fixings, size, length and minimum penetration requirements, and for external and internal corner construction and
  • Species: Western Red Cedar Grade: HERMPAC Premium Clears No.1 (PC1)
  • Profile type: Vertical Shiplap Cavity Fixing system: Over drained cavity
  • Timber species: Western Red Cedar (FJ) Size: 45mm wide x 18mm thick x 2700mm long
  • © CIL Masterspec Feb 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 54 4231HH JAMES HARDIE HARDIE™ FLEX SHEET CLADDING
  • Brand/type: Weatherboard Internal 'W' Corner Length: TBC
  • NZS 3617 Profiles of weatherboards, fascia boards and flooring NZS 4251.1 Solid plastering: Cement plasters for walls, ceilings and soffits

Plans (PDF, 11.6MB)Project Specification (PDF, 2.7MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.