← Board

2 Johnson Place Queenstown 9300

Queenstown Lakes · property 16996 · Lot 8 DP 16559 - 0.050200 Ha CT- 503384

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260863 Resource Construct Four Residential Units, Undertake An Associated Subdivision And Enable The Use Of The Residential Units For Visitor Accommodation At 2 Johnson Place, Queenstown Wolfbrook Residential Limited Decision Issued 11 Nov 2026
EA260863 Wolfbrook Residential Limited Engineering Acceptance In Relation To Construct Four Residential Units, Undertake An Associated Subdivision And Enable The Use Of The Residential Units For Visitor Accommodation At 2 Johnson Place, Queenstown Being Vetted
BC261378 Building Construction Of 4 X Two Storey Multiunit Dwellings Waiting for Further Information
NF230038 2 Johnson Place: Breach Of Building Act 114(2)(A), 115(B)(I)(A) Change Of Use Notice to Fix Issued
BC060632 Building Instal Replacement Fire With Wetback Jayline Ss300 CCC Issued 7 Jul 2006

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of RM260863 read 19 Nov 2026

Lodged by
Scott Edgar - Edgar Planning Ltd
scott@edgarplanning.co.nz
021 048 1313
Applicant
Wolfbrook Residential Limited
olivia.hermansen@wolfbrook.co.nz
027 323 7331
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • TIMBER WEATHERBOARD OILED EXT3 EXTERIOR WALL
  • Vertical Shiplapped Oiled finish - Drydens Elm
  • Vertical Shiplapped Oiled finish - Drydens Platinum

Appendix C - Architectural Plans - UPDATED (PDF, 15.3MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC261378 read 18 Nov 2026

Value of work
$1.4m estimated on the application form, GST included
Designer
Criterion Group Ltd
james@criteiongroup.nz
027 399 0363
Engineer
Tetrad Ltd
alex@tetrad.co.nz
0274257708
Lodged by
Criterion Group Ltd (Agent)
james@criteriongroup.nz
consents@wolfbrook.co.nz
027 399 0363
Applicant
Owner
olivia@wolfbrook.co.nz
027 3237331
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • ABODO VERTICAL CLADDING SYSTEM JAMES HARDIE AXON™ PANEL CLADDING
  • Abodo Type VB 20 Abodo System
  • 4221AV ABODO VERTICAL CLADDING SYSTEM This section relates to the supply and installation of Abodo Vertical cladding.
  • Vertical weatherboards Fascia
  • Abodo Weatherboard Cladding System 1.4 MANUFACTURER/SUPPLIER DOCUMENTS
  • Abodo Ltd documents relating to this part of the work: Abodo CodeMark Weatherboard Cladding Manual CWB-M-130925 April 2020
  • Company: Abodo Wood Limited Trading as: Abodo Wood
  • Web: www.abodo.co.nz Email: info@abodo.co.nz
  • 25 years (pro rata beyond 15 years): For weatherboards and accessories 40 years (pro rata beyond 15 years): For Vaaro® weatherboards and accessories
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 31 of 134 2 PRODUCTS
  • The Abodo Weatherboard Cladding System meets the requirements of the NZBC when used within the conditions and limitations of its CodeMark Certificate of Conformity CMNZ70046.
  • 1.11 EXTERNAL FIRE SPREAD - TIMBER CLADDING MATERIAL, CLASSIFICATION Abodo Vaaro® 18mm thick timber board both uncoated and with Abodo Protector WB Stain has
  • Abodo Vaaro has been tested to ISO 9705 / AS ISO 9705 and has been assigned the Group number 1-S to BPS, 8.5.1 Group Numbers.
  • 2.2 VULCAN VERTICAL WEATHERBOARDS Thermally modified Radiata Pine vertical weatherboards in WB12 and WB18 tongue & groove
  • shiplap profiles, available in Architectural Series and Standard Series grades with Brushed and Bandsawn finishes. Supplied in 1.2m minimum lengths. Refer to SELECTIONS.
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 32 of 134 2.3 VAARO® VERTICAL WEATHERBOARDS
  • Thermally modified Radiata Pine vertical weatherboards in WB12 and WB18 profiles, available in Architectural Series grade with Brushed and Bandsawn finishes. Supplied in 1.2m minimum
  • 2.14 WEATHERBOARD FIXINGS - FACE FIXED NAILS Stainless steel or class 4 hot dipped galvanized annular grooved Pentagon and Rose Head nails,
  • 2.15 WEATHERBOARD FIXINGS - SECRET FIXED NAILS Stainless steel or class 4 hot dipped galvanized annular grooved Flat Head nails, 2.8mm and
  • 2.16 WEATHERBOARD FIXINGS - POWER DRIVEN SECRET FIXED NAILS Stainless steel or class 4 hot dipped galvanized Ring R-drive nails, 2.87mm and 3.06mm x length to
  • 2.17 WEATHERBOARD FIXINGS - SECRET FIXED SCREWS Stainless steel or class 4 hot dipped galvanized self-drilling countersunk screws, 6g and 8g x length
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 33 of 134 3 EXECUTION
  • Abodo Protector water based stain and Abodo Protector End Seal, available in a range of colours. Refer to SELECTIONS.
  • Iron Vitriol (Iron Sulphate) timber coating and Abodo Protector End Seal. Conditions
  • Weatherboard cladding moisture content: 16% maximum Installation - generally
  • Install in accordance with Abodo CodeMark Weatherboard Cladding Manual. 3.6 HANDLING OF STAIN FINISHED TIMBER
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 34 of 134 3.8 CUT EDGES
  • Seal all cut edges of weatherboards, fascia, corner boards and finishing profiles with 1 coat of Abodo Protector End Seal prior to installation in accordance with manufacturer's instructions.
  • Seal all cut edges of weatherboards, fascia, corner boards and finishing profiles with Sioo:x End Grain One Sealer prior to installation in accordance with manufacturer's instructions.
  • 3.16 SETOUT VERTICAL SECRET FIX WEATHERBOARDS Lap weatherboards with 2mm expansion gap at back between each board. Setout weatherboards
  • 3.17 PRE-DRILL FIXINGS - FACE FIXED WEATHERBOARDS Setout weatherboard fixings, one fixing per nog/cavity batten, positioned 10mm off lap of adjacent
  • 3.18 PRE-DRILL FIXINGS - SECRET FIXED WEATHERBOARDS Setout weatherboard fixings, one fixing per nog/cavity batten, positioned 12mm from edge of the
  • 3.19 FIX WEATHERBOARDS - NON STRUCTURAL CAVITY BATTEN Fix weatherboards through cavity batten and underlay with 30mm minimum embedment into
  • framing. Finish fixings flush to weatherboard surface. 3.20 FIX WEATHERBOARDS - STRUCTURAL CAVITY BATTEN
  • Fix weatherboards with 30mm minimum embedment into structural cavity batten/framing. Finish fixings flush to weatherboard surface.
  • 3.21 FIX WEATHERBOARDS - NON COMBUSTIBLE CAVITY BATTEN Fix weatherboards with 8g hot dipped galvanised HDG wing tip screws, ensuring minimum
  • penetration of three threads deep into steel battens. Finish fixings flush to weatherboard surface. 3.22 SCARF JOINTS
  • apply sealant to join face and fix weatherboards with one secret nail pre-drilled 12mm minimum from each side of the join. Stagger joins 450mm minimum.
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 35 of 134 4 SELECTIONS
  • Fix internal/external corner moulds and butt weatherboards to moulding with sealant to join. 3.25 FIX BOX CORNER COVER BOARDS
  • 50mm minimum weatherboard cover and nail fix. 3.26 NOTCH EXTERNAL CORNERS
  • Router 9mm x 9mm tongue & groove notches in weatherboard vertical edges at external corners. Pre-drill holes in boards for fixings through notched joint, 1mmØ smaller than fixing gauge. Apply
  • Nail fix eaves moulds to weatherboards. 3.28 FIX FASCIA BOARDS
  • For further details on selections go to www.abodo.co.nz Substitutions are not permitted to the following, unless stated otherwise.
  • 4.1 ABODO THERMALLY MODIFIED RADIATA PINE FSC CERTIFIED SUSTAINABLE TIMBER Product: Abodo Vertical Cladding products
  • 4.2 ABODO VULCAN VERTICAL SHIPLAP WEATHERBOARDS Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: WB18 - 135mm x 18mm (115mm cover)
  • 4.3 ABODO VULCAN COVER BOARD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW92 - 90mm x 20mm
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 36 of 134 4.4 ABODO FASCIA BOARD
  • Supplier: Abodo Wood Profile: AW72 - 180mm x 25mm
  • 4.5 ABODO CORNER MOULD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW43 - 40mm x 40mm x 19mm internal/external L corner mould
  • (suitable for WB18 weatherboards) Series/Grade: Architectural Series - Vulcan
  • 4.6 ABODO EAVES MOULD Location: Exterior Cladding Generally
  • Supplier: Abodo Wood Profile: AW32 - 40mm x 27mm (6mm chamfer to one corner)
  • Supplier: Abodo Wood Type: Abodo AWF6 - 45mm cavity closer
  • Supplier: Abodo Type: Abodo AWF6 - 45mm cavity closer
  • Brand: Abodo Product: Protector Waterborne Stain and Protector End Seal
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 37 of 134 4.12 COATING - SIOO:X
  • Brand: Abodo Product: Iron Vitriol and Abodo Protector End Seal
  • © CIL Masterspec Oct 2026 4221AV ABODO VERTICAL CLADDING SYSTEM | Page 38 of 134 1 GENERAL
  • James Hardie Axon™ Panel, face primed shiplap jointed panels, 9.0mm and 8.5mm thick, manufactured from cellulose fibre reinforced cement to AS/NZS 2908.2. Refer to SELECTIONS.
  • Avoid distortion and contact with potentially damaging shiplap edges and surfaces. Do not drag panels across each other, or across other materials. Protect edges, corner and surface finish from
  • TANZ appraisal 12124 - Atlantis Linea Quattro shower base - expires 14/03/2027 TANZ appraisal 12125 - Atlantis EasyTile shower base - expires 14/03/2027
  • 25 years For Linea Quattro shower bases 25 years For EasyTile shower bases
  • 2.1 LINEA QUATTRO SHOWER SYSTEM TANZ appraised as compliant with NZBC E3/AS2. Fibreglass reinforced acrylic, ready to tile shower
  • Factory fitted, single piece LiberettoStone™ stone floor overlay for Linea Quattro shower base. Available in a range of colours. Refer to SELECTIONS.
  • 3.9 PREPARE WASTE - LINEA QUATTRO Provide a 600mm long x 150mm wide x 150mm deep waste recess to suit the shower tray. Connect

Project Specifications (PDF, 2.2MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.