← Board

Riverbank Road Wanaka 9382

Queenstown Lakes · property 15248 · Lot 7 DP 300773 - 5.064300 Ha CT- 3818

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260649 Resource Application Under Section 127 Rma To Vary Condition(S) 1, 16, 37, 38 And 42 Of Resource Consent Rm250211 To Amend The Subdivision Design And Servicing Arrangements, And Application Under Section 88 Rma To Subdivide Five Additional Lots Breaching Minimum Lot Size At 250-251 Riverbank Road, Wanaka Sargood Developments Limited Decision Issued 22 Oct 2026
PM260031 3 Bedroom Residential Dwelling With Attached 2 Bedroom Flat And Garage - Future Lot 50, Orchard Park PIC/PIM Issued
BC261499 Building Future Lot 4 , Orchard Park Construction Of A Single Storey Multiunit Dwelling With Attached Single Garage. Application Complete
BC261075 Building Construction Of Single Storey Dwelling With Attached Garage - Future Lot 57 Building Consent Issued 18 Aug 2026

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of RM260649 read 19 Nov 2026

Lodged by
Tim Williams - Williams&Co.
tim@williamsando.nz
021 2098149
Applicant
Sargood Developments Limited
matt@quartznz.com
sean@quartznz.com
021 223 2793
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
Not mentioned in the documents read

From the documents of BC261499 read 18 Nov 2026

Value of work
$665k estimated on the application form, GST included
Designer
Deva Barlow-Smith
team@dwa.co.nz
03 384 3565
Licensed: Design
Deva Barlow-Smith
Lodged by
Design Workshop Architecture Ltd (Agent Engaged for Architectural Services)
team@dwa.co.nz
03 384 3565
Applicant
Owner
brad@trinityqt.com
021 942 482
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • CL2 Ver cal Cedar Weatherboards CL3 James Hardie Ver cal
  • Oblique Weatherboards dw
  • CL2 Ver cal Cedar Weatherboards JSC Ver cal Timber weatherboards 18.5mm on
  • Weatherboards 14mm James Hardie Ver cal Oblique
  • weatherboards on 20mm cavity ba ens with building wrap.
  • Ver cal Timber Weatherboard - External mber framed walls to be 90x45mm H1.2 SG8 mber, studs @ 600mm crs,
  • board. Oblique Ver cal Weatherboard exterior wall cladding on external side.
  • Vertical Cedar Weatherboards
  • Weatherboards CL1 HI Five Roof
  • CL2 Vertical Cedar Weatherboards
  • CL2 Ver cal Cedar Weatherboards JSC Ver cal Timber weatherboards 18.5mm on 20mm cavity
  • Weatherboards 14mm James Hardie Ver cal Oblique weatherboards on
  • Weatherboards CL1
  • Oblique Weatherboards INS3
  • Oblique Weatherboards STR7
  • Ver cal Cedar Weatherboards
  • Oblique Weatherboards INS1
  • Oblique Weatherboards PL5 Internal Walls - Concrete
  • CL2 Ver cal Cedar Weatherboards JSC Ver cal Timber weatherboards 18.5mm on 20mm cavity ba ens over
  • CL3 James Hardie Ver cal Oblique Weatherboards 14mm James Hardie Ver cal Oblique weatherboards on 20mm cavity
  • Weatherboards INS1
  • Oblique Weatherboards INS1 Wall Insula on
  • Oblique Weatherboards U n i t K i tc h e n / L i v i n g
  • CL2 Ver cal Cedar Weatherboards
  • Oblique Weatherboards PL5
  • Oblique weatherboards on 20mm cavity ba ens over
  • Oblique weatherboards on 20mm cavity ba ens over Selected Masons
  • JSC Ver cal Timber weatherboards 18.5mm on 20mm cavity ba ens
  • D07 Eave Gu er - Weatherboard Detail SCALE 1:5
  • D08 Window Head - Weatherboard Detail SCALE 1:5
  • D09 Window Jamb - Weatherboard Detail SCALE 1:5
  • D10 Window Sill - Weatherboard Detail SCALE 1:5
  • weatherboards 18.5mm on 20mm cavity ba ens over
  • weatherboards on 20mm cavity ba ens over Selected Masons building wrap
  • D11 Founda on - Weatherboard Detail SCALE 1:5
  • D12 Eave Gu er - Weatherboard Detail SCALE 1:5
  • D14 Mul slider Door Sill - Weatherboard Detail SCALE 1:5
  • D15 Mul slider Door Jamb - Weatherboard Detail SCALE 1:5
  • D16 Mul slider Door Head - Weatherboard Detail SCALE 1:5
  • weatherboards on 20mm cavity ba ens over Masons Fire Retardant Underlay
  • D28 Barge - Weatherboard Detail SCALE 1:5
  • D31 Door Sill - Weatherboard Detail SCALE 1:5
  • D32 Door Jamb - Weatherboard Detail SCALE 1:5
  • D33 Door Head - Weatherboard Detail SCALE 1:5
  • ObliqueTM Weatherboard to bu into the HardieTM 14mm Aluminium
  • D38 Internal Corner - Oblique & Weatherboard Detail SCALE 1:5
  • D39 External Corner - Weatherboard Detail SCALE 1:5
  • 14mm James Hardie Ver cal Oblique weatherboards on 20mm cavity ba ens over Masons Fire Retardant Underlay
  • Weatherboard to bu into the HardieTM 14mm Aluminium External Box Corner with
  • D43 Internal Corner - Weatherboard Detail SCALE 1:5
  • Typ. Pipe Penetra on - Weatherboard Detail SCALE 1:5
  • JSC VERTICAL WEATHERBOARD CLADDING JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING
  • Hermpac Vertical weatherboard Cladding on 20mm Cavity, Dimond HiFive vertical cladding on 20mm cavity and Stria Panel cladding on 20mm cavity. Dimond HiFive roofing roof cladding to roof
  • 4221JV JSC VERTICAL WEATHERBOARD CLADDING This section relates to the supply and fixing of JSC vertical timber weatherboard cladding systems.
  • JSC Vertical Shiplap weatherboards JSC Board and Batten weatherboards
  • ALYC Alaskan Yellow Cedar BSF Band sawn face
  • WRC Western Red Cedar 90 Documents
  • NZS 3617 Profiles of weatherboards, fascia boards and flooring NZS 3631 New Zealand timber grading rules
  • BRANZ BU 411 Recommended Timber Cladding Profiles CodeMark™
  • 1.3 MANUFACTURER/SUPPLIER DOCUMENTS - JSC VERTICLAD VERTICAL SHIPLAP WEATHERBOARD CLADDING SYSTEM
  • JSC VertiClad Vertical Shiplap Weatherboard Cladding Installation, Version 3.7 JSC VertiClad Vertical Shiplap Weatherboard Cladding Design Guide, Version 1.1
  • JSC VertiClad Vertical Shiplap Weatherboard System Technical Drawings JSC VertiClad System Installation Checklists
  • JSC Exterior Weatherboard Cladding Maintenance Guide JSC Structural Cavity Battens Setout and Fixing Guide
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 55 of 177 Third Party certificate documents, samples of machined profiles, colour chips, coating colours are
  • Weatherboard Cladding Installation Guides. Ensure the JSC Weatherboard Cladding System Installation Checklist has been signed off by the
  • 1.10 COMPLIANCE - VERTICAL SHIPLAP WEATHERBOARDS ON CAVITY For information pertaining to Code Compliance refer to CodeMark Certificate No: CMNZ30084 -
  • JSC Exterior Weatherboard Cladding Maintenance Guide Compliance information
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 56 of 177 2 PRODUCTS
  • 2.1 TIMBER SPECIES - WESTERN RED CEDAR 90 JSC Western Red Cedar 90 (Thuja Plicata) purchased under recognised environmental schemes,
  • 2.2 TIMBER SPECIES – ALASKAN YELLOW CEDAR JSC Alaskan Yellow Cedar, (Callitropsis nootkatensis) heartwood purchased under recognised
  • environmental schemes, harvested from sustainably managed forests. Alaskan Yellow Cedar is a consistent pale-yellow colour with a fine, even texture and straight grain.
  • Materials - weatherboards 2.5 VERTICAL WEATHERBOARDS
  • Selected weatherboards machined to JSC profiles, lap and rebate details in accordance with BRANZ BU 411 'Recommended Timber Cladding Profiles', and general design to NZS 3617 'Profiles
  • of weatherboards, fascia boards and flooring', grading to NZS 3631 'New Zealand timber grading rules', species and durability to NZS 3602, Table 2, reference 2A.1, 'Requirements for wood-based
  • building components to achieve a 15-year durability performance'. Weatherboards in lengths to suit specific weatherboard type and construction method with all loose knots and bark-encased knots
  • To JSC profiles as detailed. Refer to SELECTIONS and JSC Weatherboard Cladding System Technical Drawings.
  • weatherboard cladding system technical drawing details. Sizes: 45mm x 20mm, 45mm x 45mm, and 45mm x 70mm.
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 57 of 177 3 EXECUTION
  • Fixing selection for wall claddings. Refer to JSC Weatherboard Cladding Installation Guides and SELECTIONS for fixing sizes and details.
  • Weatherboard Cladding Installation Guides and SELECTIONS for fixing sizes and details. NOTE: Select appropriate nail size / length to achieve the minimum required embedment into the
  • hidden lap tongues of rebated weatherboard profiles such as vertical shiplap. 2.15 FLASHING
  • joinery materials and fixings. Refer to JSC Weatherboard Cladding Installation Guides. 2.16 SHARKS TOOTH FLASHING
  • UPVC compressible flashing strip for use in high wind zones with JSC Board and Batten profiles J120, J121 and J123.
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 58 of 177 3.3 PRE-INSTALLATION REQUIREMENTS
  • NZBC E2/AS1, 9.1.7 Drained cavities and NZBC E2/AS1, 9.4 Timber weatherboards. 3.6 SUBSTRATE
  • E2/AS1, 9.4 Timber weatherboards. Application - preparation/general
  • JSC In-house Coating System provides factory-applied coating on all 4x sides of weatherboard profiles within a controlled environment delivering a full envelope seal of premium exterior grade
  • Coat uncoated weatherboards with one coat of exterior grade premium stain or specified base coats of premium exterior grade primer & undercoat on all four sides to JSC Weatherboard Cladding
  • openings (windows, meters, etc.) to JSC Weatherboard Cladding Installation Guides. Fix 75mm upstand to framing one side and 10mm upstand to cladding the other. Length and width
  • door frames and other penetrations through the cladding to JSC Weatherboard Cladding Installation Guides.
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 59 of 177 Application - cavity battens
  • Install to JSC 20mm Cavity Setout For Vertical Weatherboards instructions. Install JSC-U 45mm x 20mm cavity battens horizontally over noggs and vertically at corners and around openings.
  • back of weatherboard ensuring water is shed away from the framing when installed horizontally. Temporarily fix to wall framing studs using stainless steel clout nails over the wall underlay. Battens
  • Install to NZBC E2/AS1, 9.4 Timber weatherboards and JSC Weatherboard Cladding Installation Guides.
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 60 of 177 4 SELECTIONS
  • 3.16 FIXING JSC VERTICLAD VERTICAL SHIPLAP WEATHERBOARDS Install to JSC VertiClad Vertical Shiplap Weatherboard Cladding Installation Guide.
  • To NZBC E2/AS1, Table C.3.1.1: Fixing selection for wall claddings, single-fix each vertical shiplap weatherboard 35mm from overlapping edge, with nail driven in with a slight (0-2º) upward slope.
  • of weatherboards. All corners to be weatherproofed using corrosion resistant back flashing behind the weatherboards
  • at all external corners to JSC Weatherboard Cladding Installation Guides. Ensure all cut edges are sealed and manufacturer's coating schedules adhered to prior to
  • Where vertical weatherboards have an exposed bottom edge such as at the bottom plate, window head, inter storey junction, overhead soffit junctions, etc. the bottom edge of the weatherboards is to
  • weatherboards to be coated up to 75-150mm. Application - Ancillary
  • Fix to JSC Weatherboard Cladding Installation Guides and technical specifications. 3.18 ALUMINIUM WINDOWS
  • Fix to JSC Weatherboard Cladding Installation Guides. Material compatibility to NZBC E2/AS1, Table C.1.1.1B: Compatibility of materials in contact, and Table C.1.1.1C: Compatibility of materials
  • Scribers are to be wet-sealed in place and fixed in accordance with JSC Weatherboard Cladding Installation Guides.
  • Materials - specific timber weatherboards 4.1 JSC RADIATA PINE - VERTICLAD WEATHERBOARDS
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 61 of 177 Materials - cavity battens
  • © CIL Masterspec Nov 2026 4221JV JSC VERTICAL WEATHERBOARD CLADDING | Page 62 of 177 1 GENERAL
  • 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING This section relates to the supply and fixing of Oblique™ Weatherboard cladding.
  • Oblique™ Weatherboard by James Hardie® Cavity Cladding System
  • Oblique™ Weatherboard Horizontal Installation Technical Specification (March 2026) Oblique™ Weatherboard Vertical Installation Technical Specification (March 2026)
  • Oblique™ Weatherboard Vertical Installation to Hardie™ 40mm Structural Horizontal Cavity Batten Technical Specification (March 2026)
  • BRANZ Appraisal 1231 (2022) - Oblique™ Weatherboard (Horizontal) Cavity Cladding - amended 31 March 2026
  • BRANZ Appraisal 1232 (2022) - Oblique™ Weatherboard (Vertical) Cavity Cladding - amended 31 March 2026
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 63 of 177 Warranties
  • 25 years For Oblique™ Weatherboard products (refer to James Hardie® product warranty)
  • Oblique™ Weatherboard Care and Maintenance guide. Provide this information prior to practical completion.
  • 1.10 OBLIQUE™ WEATHERBOARD INSTALLATION CHECKLIST Installer to complete, sign and provide a James Hardie® Installation Checklist.
  • James Hardie® Oblique™ Weatherboard meets the requirements of the NZBC when used within the Conditions and Limitations of its Certificate of conformity CMNZ30147.
  • James Hardie® Oblique™ Weatherboard cladding tested to AS/NZS 3837 and to specific requirements of C/AS1 or C/AS2 achieving Type A classification (peak heat release rate ≤ 100
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 64 of 177 2 PRODUCTS
  • 2.1 OBLIQUE™ WEATHERBOARDS Oblique™ Weatherboards, rusticated profile, 14mm thick, available in 200mm or 300mm widths and
  • Aluminium moulding used beside window opening to end butt the Oblique™ Weatherboard. 2.6 HARDIE™ 14MM ALUMINIUM TRIMLINE JOINT FLASHING
  • 2.9 WEATHERBOARD INTERNAL "W" CORNER Anodised aluminium extrusion to flash behind cladding at internal corners.
  • Oblique™ Weatherboards over cavity battens over flexible underlay. Design Workshop Architecture Lot 4 Orchard Park 360945
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 65 of 177 3 EXECUTION
  • fixing Oblique™ Weatherboards over cavity battens over flexible underlay. 2.16 FLEXIBLE SEALANT
  • weatherboards are fixed. Application - particular installations
  • 3.5 INSTALL CAVITY BATTENS - OBLIQUE™ VERTICAL WEATHERBOARDS Install 20mm thick Hardie™ Horizontal Cavity Battens. Fix horizontal cavity battens to wall framing
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 66 of 177 4 SELECTIONS
  • 3.7 INSTALL OBLIQUE™ WEATHERBOARDS - VERTICAL INSTALLATION Cut weatherboards to required lengths. Prime site cut ends that are exposed prior to installation.
  • Fit joint flashing, internal corners and external corners and fix weatherboards as per Oblique™ Weatherboard Vertical technical specifications.
  • 4.1 JAMES HARDIE® OBLIQUE™ WEATHERBOARDS Location: Refer to Architectural Plans
  • Type/Brand: Oblique™ Weatherboards Thickness: 14mm
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 67 of 177 1 GENERAL

Plans (PDF, 8.3MB)Project Specification (PDF, 1.9MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC261075 read 18 Nov 2026

Value of work
$560k estimated on the application form, GST included
Designer
Jackie Robinson
hello@jackierobinson.co.nz
Lodged by
Chance Anderson (Draftsman)
chanceandersontaupo@gmail.com
021665170
Applicant
Owner
fraser@calibresouth.co.nz
0279298108
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
Not mentioned in the documents read