← Board

2 Onyx Street Albert Town 9305

Queenstown Lakes · property 151070 · LOT 89 DP 587915 - 0.051400 Ha CT- 1133329

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260758 Resource Construction Of A Residential Unit Breaching Building Length And Setback Standards At 2 Onyx Street, Wanaka Beacon Point Building Limited Decision Issued 30 Sep 2026
RM250620 Resource Withdrawn Beacon Point Building Limited Withdrawn
CC250079 M Ch'ng & R Chan Connection To Vehicle Crossing At 2 Onyx Street, Wanaka Approved
BC250916 Building On Hold Construction Of Single Storey Dwelling With Attached Garage On Hold at Applicants Request

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of RM260758 read 19 Nov 2026

Lodged by
Dave Peachey, Beacon Point Building Ltd
dave.peachey@gjgardner.co.nz
03 4432196
021 2608507
Applicant
Beacon Point Building Limited
dave.peachey@gjgardner.co.nz
veronica.kotkamp@gjgardner.co.nz
03 4432196
021 2608507
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • New single storey 4 bedroom dwelling with vertical cedar shiplap, Axon panel and trapazoidal Coloursteel cladding to the roof and walls. SED foundations,
  • Vertical Cedar HP52 Shiplap stained FITOUT
  • Hermpac Vertical Shiplap HP52 over 20mm cavity
  • Client selected Hermpac Vertical Shiplap HP52 fixed over cavity battens over wall underlay, Refer
  • Vertical Cedar HP52 Shiplap stained Axon Panel Painted 133mm Smooth
  • Vertical Cedar Shiplap stained
  • Vertical Cedar shiplap over SED
  • Vertical Cedar HP52 Shiplap 18.24 11.36% Vertical 5-Rib Coloursteel 43.92 27.35%
  • Vertical cedar shiplap Axon Panel

Plans (PDF, 4.4MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC250916 read 18 Nov 2026

Value of work
$655k estimated on the application form, GST included
Designer
Amy Cumming - Cornerstone Design
021 184 1943
Engineer
David Lau - Wilton Joubert Limited
jobs@wjl.co.nz
Licensed: Design
Amy Cumming
Licensed: Foundations
David Lau
Lodged by
GJ Gardner Wanaka/central Otago (Agent)
veronica.kotkamp@gjgardner.co.nz
03 443 2196
Applicant
Owner
ng@waikatodhb.health.nz
021804619
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • New single storey 4 bedroom dwelling with vertical cedar shiplap, Axon panel and trapazoidal Coloursteel cladding to the roof and walls. SED
  • Vertical Cedar HP52 Shiplap stained FITOUT
  • Shiplap 2,007
  • Shiplap 3,569
  • Shiplap Shiplap
  • Hermpac Vertical Shiplap HP52 over 20mm cavity
  • Client selected Hermpac Vertical Shiplap HP52 fixed over cavity battens over wall underlay, Refer to details
  • Vertical Cedar HP52 Shiplap stained Axon Panel Painted 133mm Smooth
  • Vertical Cedar Shiplap stained
  • Vertical Cedar shiplap over SED Scissor trusses
  • Vertical Cedar HP52 Shiplap stained: 14.15m² - 9.35% Axon Panel Painted 133mm Smooth: 60.36m² - 39.89%
  • Vertical cedar shiplap Axon Panel
  • Selected Hermpac shiplap weatherboards
  • Wall Base - Hermpac Shiplap 20
  • Vertical Shiplap weatherboards
  • Head - Vertical Shiplap Sill - Vertical Shiplap
  • Jamb - Vertical Shiplap Sill - 5-Rib
  • Selected shiplap weatherboards
  • EC Junction - Shiplap to Axon Panel 50mm min. over
  • Wall Pipe Penetration - Shiplap WB Timber cavity batten
  • shiplap weatherboards MS sealant over PEF rod
  • EC Junction - Shiplap to Axon Panel with Flexilap trim
  • cover to weatherboard and have 50mm return under soffit
  • Hermpac cedar eaves moulding
  • Optional Hermpac Accoya eaves mould cut to suit as required
  • shiplap weatherboards Wall underlay
  • Internal Corner - Shiplap to Axon Panel Verandah beam
  • HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM JAMES HARDIE AXON™ PANEL CLADDING
  • New single storey 3 bedroom dwelling with Vertical Cedar wall cladding, and trapazoidal Coloursteel cladding to the roof and walls. SED foundations, trusses by truss manufacturer. Services to be
  • Brand/Type: Hermpac / HP55 Vertical Shiplap Weatherboards Finish: Owner to select
  • 2.1 TIMBER WEATHERBOARD 2.2 FIBRE CEMENT SHEET CLADDING
  • 3.5 PRIME OR SEAL TIMBER WEATHERBOARDS 3.6 INSTALL TIMBER WEATHERBOARDS
  • (minimum 2 coats) before fixing weatherboards and exterior trim. Install level, true to line and face, to NZBC E2/AS1, 9.4 Timber weatherboards.
  • 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM 1 GENERAL
  • Vertical Shiplap weatherboards Refer to painting sections for finishes to weatherboard cladding.
  • NZS 3617 Profiles of weatherboards, fascia boards and flooring JAS-ANZ CodeMark Certification CMNZ30036 - Hermpac VertiLine Vertical Shiplap Weatherboard
  • Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System installation Specifications Hermpac Vertical Shiplap Weatherboard Direct Fix System Installation Specifications
  • Hermpac Product Technical Statement (PTS) – VertiLine Vertical Shiplap Weatherboard Cavity System (July 2023)
  • Hermpac Product Installation Checklist – VertiLine Vertical Shiplap Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac Board and Batten Weatherboard Cavity System Installation Specifications Hermpac Board and Batten Weatherboard Direct Fix System Installation Specifications
  • Hermpac Product Technical Statement (PTS) – Board and Batten Weatherboard Cavity System (July 2023)
  • Hermpac Product Installation Checklist – Board and Batten Weatherboard Cavity System (Jan 2023 V2)
  • Hermpac WR & Yellow Cedar cuts and characteristics BRANZ Appraisal 650 - Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 23 1.5 WARRANTY - INSTALLER/APPLICATOR
  • 2.2 VERTICAL SHIPLAP Web: www.hermpac.co.nz
  • 5 years For installation of Hermpac vertical weatherboard cladding systems Provide this warranty on the installer/applicator standard form (if not available then use the
  • Hermpac vertical weatherboard cladding systems meet the requirements of the NZBC when used within the Conditions and Limitations of their Certificate CMNZ30036.
  • Weatherboards to Hermpac profiles, Lap and Rebate details to BRANZ BU 411 and general design to the NZS 3617, species and grading to NZS 3602, table 2, reference 2A.1, Requirements for
  • wood-based building components to achieve a 15-year durability performance. Weatherboards in lengths relevant to profile selection and application, with all unsound and open split knots excluded
  • Acceptable Solution is limited to the following types of weatherboards and their derivatives: Vertical Standard Shiplap and Hermpac Custom Profiles
  • A selection of the above profiles are also available in Western Red Cedar and Yellow Cedar finger-joint (CedarOne Evolve and CedarLine Evolve). CedarOne Evolve is quarter-sawn cut Cedar.
  • CedarLine Evolve is primarily flat-sawn cut Cedar. Evolve profiles are available across most standard and custom profiles. The timber is machined with a “combed” finish to the front face and
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 24 2.3 COVER BOARDS, SMART CORNERS, MOULDINGS AND SCRIBERS
  • Western Red Cedar and Yellow Cedar. Profiles are machined with a “dressed” finish to the front face and the exposed corners are machined to paint quality - PQ (ie. rounded edges for paint
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 25 3 EXECUTION
  • Site applications to manufacturers specifications. All Hermpac weatherboards and mouldings must be coated all six sides prior to installation.
  • framing, and NZBC E2/AS1, 9.4 Timber weatherboards, governing support for timber board cladding and Hermpac Installation Specifications.
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 26 3.9 PENETRATIONS
  • 3.13 FIXING VERTICAL SHIPLAP WEATHERBOARDS Refer to Hermpac Cavity System Installation Specification. Seal the top of the cavity and install
  • relative to visible edge of board. For vertical shiplap boards, where possible the exposed lap should face away from the prevailing wind.
  • Install level, true to line and face, to NZBC E2/AS1: 9.4 Timber weatherboards. Double coat all cut ends before fixing. Provide one face fixing per weatherboard at each Vertibat cavity batten over
  • Hermpac Western Red Cedar, Yellow Cedar, DuraLarch™ or AshinDura™ weatherboards fixed with Stainless Steel or Silicon Bronze Hermpac Crown, Rose and Flat Head nails or Hermpac Starcap
  • screws and Kanda weatherboards fixed with Hermpac Starcap screws are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally fixed Vertibat cavity
  • Hermpac Western Red Cedar weatherboards fixed with stainless steel jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Medium when dwangs or structurally fixed Vertibat
  • Hermpac Yellow Cedar, DuraLarch™ and AshinDura™ weatherboards fixed with jolt head nails are limited to use in NZS 3604 Wind Zones up to and including Extra High when dwangs or structurally
  • Install level, true to line and face, to NZBC E2/AS1: 9.4 Timber weatherboards. Single face fix weatherboards to every fixing point, clear of the adjacent lapped board. Fixing to be driven in with a
  • Hermpac Construction Drawings for accurate weatherboard fixing information. Using a Hermpac specialty clinch nail, prior to the next row of Vertical Shiplap boards being fixed
  • clinch nail into the cavity batten so that the clinch head settles flush into the weatherboard's surface. The clinch nail head must not sit proud of the timber surface nor prevent the correct separation of
  • each adjacent row of boards. Do not pin laps or weatherboard faces. Prime Designs NewZealand Limited Proposed Dwelling - 880279 327396
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 27 3.14 INSTALL FLASHINGS
  • 4.1 HERMPAC - VERTICAL SHIPLAP 4.2 HERMPAC CORNER MOULDS, COVER BOARDS, BOXED CORNERS & SCRIBERS
  • 4.3 WEATHERBOARD FASTENINGS - STAINLESS STEEL NAILS Refer to Hermpac Construction Drawings and Installation Specification for suitable face fixings
  • Kanda weatherboards must be fixed with Hermpac Starcap screws), correct placement of fixings, size, length and minimum penetration requirements, and for external and internal corner
  • Coated weatherboards laid over Mill Finish Grade 316 Stainless Steel: Sika: Wipe weatherboard surfaces with a clean rag. Using an abrasive pad, rub down Stainless
  • Steel in a single pass before cleaning with Sika Aktivator-205. Coat both weatherboards and Stainless Steel with Sika Primer 3N and apply a continuous 5mm bead of Sikaflex-11FC or Sikaflex
  • Soudal: Wipe weatherboard surfaces with a clean rag before wiping Stainless Steel only with Gorilla 696 Surface Activator, being careful not to coat any powder coated surfaces. Apply a minimum
  • Profile type: Vertical Shiplap Cover dimensions: 155mm
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 28 4.4 WEATHERBOARD FASTENINGS - SCREWS
  • 4.5 WEATHERBOARD FASTENINGS - STAINLESS STEEL JOLT HEAD NAILS 4.6 VERTIBAT CAVITY BATTENS - NON STRUCTURALLY FIXED
  • © CIL Masterspec May 2025 4221HV HERMPAC VERTICAL WEATHERBOARD CLADDING SYSTEM Page 29 4231HA JAMES HARDIE AXON™ PANEL CLADDING
  • James Hardie Axon™ Panel, face primed shiplap jointed panels, 9.0mm and 8.5mm thick, manufactured from cellulose fibre reinforced cement to AS/NZS 2908.2. Refer to SELECTIONS.
  • Avoid distortion and contact with potentially damaging shiplap edges and surfaces. Do not drag panels across each other, or across other materials. Protect edges, corner and surface finish from

Plans (PDF, 8.2MB)Project Specifications (PDF, 0.4MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.