← Board

3 Mara Way Lower Shotover 9304

Queenstown Lakes · property 148640 · LOT 19 DP 568849 - 0.200200 Ha CT- 1023846 LOT 202 DP 568849 - 0.060100 Ha CT- Multiple

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
RM260230 Resource Application Under Section 127 Of The Resource Management Act 1991 (Rma) To Change Conditions 1, 13 (Specifically 13C, J, And K), And 19 Of Rm250021 To Remove The Need For Road Widening With The Private Ways At Kahiwi Drive, Lower Shotover, Queenstown Koko Ridge Limited Decision Issued 5 May 2026
PR260013 3 Mara Way, Lower Shotover, Queenstown | Swimming Pool Complies
BC261511 Building Construction Of Single Storey Dwelling With Attached Garage Application Complete
RM250254 Resource To Construct A Residential Unit, And Associated Accessory Buildings, Breaching Site Coverage Standards At 3 Mara Way Lower, Shotover, Queenstown R Andrews, K Andrews & B Andrews Decision Issued 11 Jun 2025
MN250254 R Andrews, K Andrews & B Andrews - To Construct A Residential Unit, And Associated Accessory Buildings, Breaching Site Coverage Standards At 3 Mara Way Lower, Shotover, Queenstown Awaiting Officer Review
BC250299 Building Construction Of Detached Dwelling With Garage And Swimming Pool CCC Issued 17 Mar 2026

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261511 read 18 Nov 2026

Value of work
$1.6m estimated on the application form, GST included
Designer
Deva Barlow-Smith
team@dwa.co.nz
03 384 3565
Licensed: Design
Deva Barlow-Smith
Lodged by
Design Workshop Architecture Ltd - Deva Barlow-Smith (Agent Engaged for Architectural Services)
team@dwa.co.nz
03 384 3565
Applicant
Owner
rob@thecode.co.nz
kerrytempler@gmail.com
0274 200021
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • WEATHERBOARD 6.75m, 92° 31' 1"
  • WEATHERBOARD James Hardie Oblique Weatherboard on
  • WEATHERBOARD W12
  • WEATHERBOARD D03 D04 W03 D05 W01
  • CL3 HORIZONTAL TIMBER WEATHERBOARD James Hardie Oblique Weatherboard on
  • WEATHERBOARD W05 D01 D02
  • WEATHERBOARD W13
  • WEATHERBOARD Li vi n g D08
  • WEATHERBOARD EXT1 GUTTER
  • WEATHERBOARD G F E D C B A
  • WEATHERBOARD EXT2 METAL FASCIA
  • WEATHERBOARD GIB1 PLASTERBOARD
  • Weatherboard on 20mm cavity ba ens on 7mm Ecoply with
  • D04 Window Head - Weatherboard Detail Scale 1:5
  • D05 Window Jamb - Weatherboard Detail Scale 1:5
  • D06 Window Sill Rebate - Weatherboard Detail Scale 1:5
  • D03 Soffit Junction - Weatherboard Detail Scale 1:5
  • D11 Window Head / Soffit Junction - Weatherboard Detail Scale 1:5
  • D12 Multislider Door Head / Window Sill - Weatherboard Detail Scale 1:5
  • D14 Foundation - Weatherboard Detail Scale 1:5
  • D15 Window Sill - Weatherboard Detail Scale 1:5
  • D16 Window Jamb - Weatherboard Detail Scale 1:5
  • D17 Window Head - Weatherboard Detail Scale 1:5
  • D28 Garage Door Jamb - Weatherboard Detail Scale 1:5
  • D29 Garage Door Head - Weatherboard Detail Scale 1:5
  • D30 Barge / Soffit Junction - Weatherboard Detail Scale 1:5
  • D35 Internal Corner / Joinery Jamb - Weatherboard Detail Scale 1:5
  • D36 Internal Corner - Metal & Weatherboard Detail Scale 1:5
  • D37 External Corner / Joinery Jambs - Weatherboard Detail Scale 1:5
  • D38 Internal Corner - Weatherboard Detail Scale 1:5
  • D39 Vertical Junction - Metal & Weatherboard Detail Scale 1:5
  • Typ. Penetration - Weatherboard Scale 1:5
  • JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING JAMES HARDIE® SOFFITS
  • 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING This section relates to the supply and fixing of Oblique™ Weatherboard cladding.
  • Oblique™ Weatherboard by James Hardie® Cavity Cladding System
  • Oblique™ Weatherboard Horizontal Installation Technical Specification (March 2026) Oblique™ Weatherboard Vertical Installation Technical Specification (March 2026)
  • Oblique™ Weatherboard Vertical Installation to Hardie™ 40mm Structural Horizontal Cavity Batten Technical Specification (March 2026)
  • BRANZ Appraisal 1231 (2022) - Oblique™ Weatherboard (Horizontal) Cavity Cladding - amended 31 March 2026
  • BRANZ Appraisal 1232 (2022) - Oblique™ Weatherboard (Vertical) Cavity Cladding - amended 31 March 2026
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 78 of 187 Warranties
  • 25 years For Oblique™ Weatherboard products (refer to James Hardie® product warranty)
  • Oblique™ Weatherboard Care and Maintenance guide. Provide this information prior to practical completion.
  • 1.10 OBLIQUE™ WEATHERBOARD INSTALLATION CHECKLIST Installer to complete, sign and provide a James Hardie® Installation Checklist.
  • James Hardie® Oblique™ Weatherboard meets the requirements of the NZBC when used within the Conditions and Limitations of its Certificate of conformity CMNZ30147.
  • James Hardie® Oblique™ Weatherboard cladding tested to AS/NZS 3837 and to specific requirements of C/AS1 or C/AS2 achieving Type A classification (peak heat release rate ≤ 100
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 79 of 187 2 PRODUCTS
  • 2.1 OBLIQUE™ WEATHERBOARDS Oblique™ Weatherboards, rusticated profile, 14mm thick, available in 200mm or 300mm widths and
  • Aluminium moulding used beside window opening to end butt the Oblique™ Weatherboard. 2.9 HARDIE™ 14MM ALUMINIUM TRIMLINE JOINT FLASHING
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 80 of 187 3 EXECUTION
  • Oblique™ Weatherboards over cavity battens over flexible underlay. 2.16 GRADE 316 STAINLESS STEEL NAILS
  • fixing Oblique™ Weatherboards over cavity battens over flexible underlay. 2.17 HOT DIPPED GALVANIZED NAILS
  • Oblique™ Weatherboards over battens over rigid air barrier. 2.18 GRADE 316 STAINLESS STEEL NAILS
  • Oblique™ Weatherboards over battens over rigid air barrier. 2.19 FLEXIBLE SEALANT
  • weatherboards are fixed. Application - particular installations
  • 3.5 INSTALL CAVITY BATTENS - OBLIQUE™ HORIZONTAL WEATHERBOARDS Install 20mm minimum thick cavity battens to NZBC E2/AS1, 9.0 Wall claddings, where required.
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 81 of 187 4 SELECTIONS
  • 3.7 INSTALL OBLIQUE™ WEATHERBOARDS - HORIZONTAL INSTALLATION Cut weatherboards to required lengths for vertical jointing. Prime site cut ends that are exposed
  • prior to installation. Fit vertical jointers, internal and external corners and fix weatherboards as per Oblique™ Weatherboard Horizontal technical specifications.
  • 4.1 JAMES HARDIE® OBLIQUE™ WEATHERBOARDS Location: Refer to Architectural Plans
  • Type/Brand: Oblique™ Weatherboards Thickness: 14mm
  • © CIL Masterspec Nov 2026 4231HO JAMES HARDIE® OBLIQUE™ WEATHERBOARD CLADDING | Page 82 of 187 1 GENERAL

Plans (PDF, 11.3MB)Project Specifications (PDF, 2.0MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of RM250254 read 19 Nov 2026

Lodged by
Design Workshop Architecture Ltd - Deva Barlow-Smith
team@dwa.co.nz
03 384 3565
Applicant
R Andrews, K Andrews & B Andrews
rob@thecode.co.nz
kerrytempler@gmail.com
021 537798
0274 200021
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • - James Hardie Linea Horizontal Weatherboard, Grey colour - Aluminium Joinery, Grey colour (including Front Door and Garage Door)

AEE (PDF, 0.8MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.

From the documents of BC250299 read 19 Nov 2026

Value of work
$1.8m estimated on the application form, GST included
Designer
Deva Barlow-Smith
team@dwa.co.nz
03 384 3565
Licensed: Design
Deva Barlow-Smith
Lodged by
Design Workshop Architecture (Agent Engaged for Architectural Services)
team@dwa.co.nz
03 384 3565
Applicant
Owner
rob@thecode.co.nz
kerrytempler@gmail.com
021 537798 0274
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
Not mentioned in the documents read