← Board

33 Spur Ridge Rise Jacks Point 9371

Queenstown Lakes · property 130650 · LOT 4021 DP 563099 - 0.051200 Ha CT- 999989

Every consent eDocs lists on this property

Consent Description Applicant Status Status date
BC261354 Building Construction Of Two Storey Multi-Unit Dwelling With Attached Garage Waiting for Further Information

Consent numbers link to the consent's documents in QLDC eDocs, which needs an eDocs sign-in.

From the documents of BC261354 read 18 Nov 2026

Value of work
$600k estimated on the application form, GST included
Designer
SteveBrown
steve@3dr.co.nz
021 538 101
Engineer
Stephen Edward Pinkney
stephen@vert-x.co.nz
06 358 8880
Licensed: Design
Steve Brown
Licensed: Foundations
Stephen Edward Pinkney
Lodged by
Steve Brown (Contracted to Produce consent drawings)
steve@3dr.co.nz
021 538 101
Applicant
Owner
anmuthu@gmail.com
0277037163
As written on the application form. Don't add applicants to email marketing lists: that needs their consent.
Timber cladding
  • JH Linea WB Details Details
  • Cladding JH Linea and Armorsteel Linear 800 Aluminum Joinery
  • JH Linea Weatherboard on 20mm drained cavity, Colour : Lichen
  • 4 linear 800 -cladding 5 Linea Weatherboard Project:
  • JH Linea Weatherboard on 20mm drained cavity,
  • JH Linea WB Details Contents:
  • Linea weatherboards over 20mm cavity.
  • Scriber cut to suit weatherboard pro le, sealed to weatherboards.
  • Linea weatherboards Air seal on PEF backing rod.
  • Linea aluminium internal 'W' corner
  • Linea Weatherboards. Site cut edges to be primed prior to
  • Linea Weatherboards. Site cut edges to be
  • Linea Weatherboard Proprietary tape or alternatively
  • to weatherboard Line of head ashing over
  • Linea Weatherboard 8mm thick H3.2 packer
  • Linea Weatherboard Sill support bar as
  • Linea™ Weatherboard nished with selected coating
  • Face nail weatherboards to inner studs only. Refer to
  • Linea™ Aluminium External Slimline Box Corner
  • James Hardie Linea Weatherboard cladding over
  • 2 JH Linea WB Internal Corner Detail 1:5 3 JH Linea WB Window Door Head Detail 1:5
  • 5 JH Linea WB Window/ Door Jamb Detail 1:5 8 JH Linea WB Window Sill Detail 1:5
  • 6 JH Linea WB External Corner Detail 1:5 7 JH Linea WB Soffit Detail 1:5
  • Linea weatherboard uPVC cavity closer. Mitre at
  • 2 Linear- 800 Internal Corner to JH Linea WB 1:5 3 Linear- 800 External Corner to JH Linea WB 1:5
  • 5 JH Linea Cladding Base Detail 1:5 Project:
  • Refer to JH Linea WB External Corner Detail on
  • Linea ® WB Selected Coating.
  • Refer to JH Linea Cladding Base Detail on sheet 504
  • Linea weatherboard Page 23
  • 2 JH Linea Cladding Base Section Detail 1:5 3 Balustrade Fixing Details
  • 4. Where the cladding is a corrosive timber, such as western red cedar or redwood, or is treated with copper based ACQ or CuAz preservatives, use stainless steel or silicon bronze.
  • JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING JAMES HARDIE® SOFFITS
  • 4231HL James Hardie® Linea™ Weatherboard Cladding 4239JH James Hardie® Soffits
  • 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING This section relates to the supply and fixing of James Hardie® Linea™ Weatherboard cladding.
  • Linea™ Weatherboard by James Hardie® Direct Fixed and Cavity Cladding systems
  • James Hardie® Linea™ Weatherboard Direct Fix Technical Specification (August 2025) James Hardie® Linea™ Weatherboard Cavity Fix Technical Specification (August 2025)
  • James Hardie® Technical Supplement - Linea™ Weatherboard Fixing to Brick Veneer Framing James Hardie® Technical Supplement - Hardie® Fibre Cement Claddings Installation to Steel
  • James Hardie® Linea™ Weatherboard Installation Checklist BRANZ Appraisal 447 (2020) - Linea™ Weatherboard Cavity Cladding
  • 25 years For James Hardie® Linea™ Weatherboards 15 years For accessories supplied by James Hardie®
  • © CIL Masterspec Sep 2026 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING | Page 39 of 116 2 PRODUCTS
  • James Hardie® Linea™ Weatherboard Care and Maintenance guide Provide this information prior to practical completion.
  • James Hardie® Linea™ Weatherboard meets the requirements of the NZBC when used within the Conditions and Limitations of its Certificate of conformity CMNZ30018
  • James Hardie® Linea™ Weatherboard has been appraised as meeting provisions of the NZBC when used within the Conditions and Limitations of its BRANZ Appraisal 447.
  • 2.1 LINEA™ WEATHERBOARDS Pre-primed lightweight cellulose cement composite bevel back weatherboards manufactured to
  • 2.4 LINEA™ EXTERNAL SLIMLINE BOX CORNER MOULD Etched primed aluminium extrusion with box section. Available in 2700mm and 4000mm lengths.
  • 2.5 LINEA™ INTERNAL CORNER "W" MOULD 90 Etched primed aluminium extrusion. Available in 2700mm and 4000mm lengths. Refer to
  • © CIL Masterspec Sep 2026 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING | Page 40 of 116 3 EXECUTION
  • 2.6 LINEA™ INTERNAL CORNER "W" MOULD 135 Etched primed aluminium extrusion, 2700mm length.
  • 2.7 LINEA™ CAVITY CLOSER 35mm wide perforated PVC vented cavity closer with built in cant strip, 70mm upstand, 3000mm
  • To James Hardie® Linea™ Weatherboard technical specifications. 3.6 INSTALL CAVITY CLOSURE
  • © CIL Masterspec Sep 2026 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING | Page 41 of 116 4 SELECTIONS
  • 3.10 CUT LINEA™ WEATHERBOARDS Cut weatherboards to required lengths. Prime site cut ends prior to installation.
  • 3.11 JOINTING LINEA™ WEATHERBOARDS Apply a continuous bead of flexible sealant to tongue edge of weatherboard fitting joints off-stud to
  • 3.12 FIX LINEA™ WEATHERBOARDS - CONCEALED NAILING Fit weatherboard horizontally. Fix at 20mm from top of weatherboard into framing. Finish nails flush
  • to surface. Fit subsequent weatherboard row with 30mm overlap to previous weatherboard concealing the nail fixing under the horizontal lap.
  • 3.13 FIX LINEA™ WEATHERBOARDS - FACE NAILING Install weatherboards horizontally with 30mm overlap. Pre-drill hole. Fix via hand-driven nails at
  • 15mm from bottom of upper weatherboard through horizontal lap (i.e. through 2 rows of weatherboards) into framing. Punch nails 2mm below the surface and fill nails heads with builders
  • 3.14 FIXING LINEA™ WEATHERBOARD ENDS - CONCEALED NAILING Fix minimum 25mm from weatherboard end for hand driven nails or minimum 50mm from
  • weatherboard ends for gun driven nails. Completion & Commissioning
  • 4.1 JAMES HARDIE® LINEA™ WEATHERBOARDS - CAVITY FIXED Location: Refer Plans
  • Brand: Linea™ Weatherboard Thickness: 16mm
  • © CIL Masterspec Sep 2026 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING | Page 42 of 116 Components
  • 4.2 LINEA™ SLIMLINE BOXED CORNER Location: Refer Details
  • Brand/type: Linea™ External Slimline Box Corner Material: Aluminium
  • 4.3 LINEA™ INTERNAL CORNER "W" MOULD 90 Location: Refer Details
  • Brand/type: Linea™ 90° internal 'W' mould Material: Aluminium
  • © CIL Masterspec Sep 2026 4231HL JAMES HARDIE® LINEA™ WEATHERBOARD CLADDING | Page 43 of 116 1 GENERAL
  • JH Linea WB To cladding manufacturer's requirements Resene exterior paint systems
  • 4.2 RESENE NEW EXTERIOR LINEA™ BOARDS Surface Prep: Resene SIPDS No3 and Spec Sheet 3: 4A/1

Plans (PDF, 9.1MB)Project Specification (PDF, 4.8MB)

Lines of the assessment, plans or specification that mention timber cladding. Some describe what the neighbourhood rules allow rather than what is proposed.